Re: [nv-l] Understanding ITSL2 Node Marginal Trap
2003-10-02 14:37:56
You need to call IBM Support to get
these fixes.
----------------------------------------------
Becky Anderson
Technical Evangelist
Event Correlation and Automation
IBM Tivoli Software
andersrs AT us.ibm DOT com
office & fax 630 568 7030 (TL 994)
cell 630 240 2879 6302402879 AT mobile.att DOT net
| Milton.W.Bridges AT kp DOT org
Sent by: owner-nv-l-digest AT lists.us.ibm DOT com
10/02/2003 11:11 AM
Please respond to nv-l
|
To:
nv-l AT lists.us.ibm DOT com
cc:
Subject:
Re: [nv-l] Understanding ITSL2 Node
Marginal Trap |
As a newbie, where can I find IY40359 and/or IY48698. Had no problem
locating FixPack1, but having trouble locating the others. Does anyone
have the url for information/downloads on the interim fixes?
Thanks
-Milt
Milton W. Bridges III
Network Automation Systems Programmer
Kaiser Permanente IT National Operations
Enterprise Automation Services, Design and Engineering
(909)739-5339
8-395-5339
| Becky Anderson <andersrs AT us.ibm DOT com>
Sent by: owner-nv-l-digest AT lists.us.ibm DOT com
10/02/2003 07:49 AM
Please respond to nv-l
|
To: nv-l AT lists.us.ibm DOT com
cc: nv-l AT lists.tivoli DOT com,
owner-nv-l-digest AT lists.us.ibm DOT com, Raymond.W.Westphal AT erac DOT com
Subject: Re: [nv-l]
Understanding ITSL2 Node Marginal Trap |
Ray,
At times the color of the switch icon is incorrect when the switch is marginal.
There is an interim fix IY40359 for Unix, superseded by IY48698 as
of 9/24, that addressed this. It fixes the occasional problem
of inconsistent switch status colors between network and segment submaps.
This fix is required when using NetView 7.1.3 fixpack 1. (By
the way, do you have NetView fixpack 1 installed? ITSA requires it.)
You should also check the oper status of those ports listed in the NetView
event you mentioned. At the NetView GUI, highlight the switch and
select Monitor-->Other-->Interfaces. In addition check /usr/OV/ITSL2/log/poll_server.log
for possible errors associated with these ports.
----------------------------------------------
Becky Anderson
Technical Evangelist
Event Correlation and Automation
IBM Tivoli Software
andersrs AT us.ibm DOT com
office & fax 630 568 7030 (TL 994)
cell 630 240 2879 6302402879 AT mobile.att DOT net
| "Westphal, Raymond
W" <Raymond.W.Westphal AT erac DOT com>
Sent by: owner-nv-l-digest AT lists.us.ibm DOT com
10/01/2003 03:19 PM
Please respond to nv-l
|
To: <nv-l AT lists.tivoli DOT com>
cc:
Subject: [nv-l] Understanding
ITSL2 Node Marginal Trap |
Hello Everyone,
NetView 7.1.3 on AIX 5.2 and experimenting
with with ITSL2 Version 1.2.1.
I'm receiving switch analyzer node marginal
traps from several 29xx series switches. And the switch does NOT change
to marginal (yellow) status. Below is an example:
1065037619 3 Wed Oct 01 14:46:59 2003 switch1.abc.com
V Node Marginal [0.0.0.0/FastEthernet0/37, 0.0.0.0/FastEthernet0/28, 0.0.0.0/FastEthernet0/19,
0.0.0.0/FastEthernet0/17, 0.0.0.0/FastEthernet0/16]
I cannot find an explanation of the event
message. When I telnet to the switch, I cannot find any logs indicating
problems for the ports listed. In fact - no ports on the source swtich
are reporting any problems.
There is nothing listed under "Impact Analysis" for the particular
switch.
Are there any ITSL2 users who can explain the traps message?
Thanks in advance.
Ray Westphal
Enterprise Rent-A-Car
|
|
|