Couple of things to try:

1) cd /usr/OV/ITSL2/bin
   ./correlator

If it's a library problem, it will show up when trying to run
the component from the command line. (If so, please send error back).

2) check for any *.err files in /usr/OV/ITSL2/bin

If a component fails before it is completely initialized,
it will create a .err file instead of a .log file. (If there is any data in
them, please send back).

Greg


-----Original Message-----
From: Anabella_Gonzalez AT banesco DOT com
[mailto:Anabella_Gonzalez AT banesco DOT com]
Sent: Friday, August 29, 2003 3:20 PM
To: crowg AT magnum-tech DOT com
Cc: nv-l AT lists.tivoli DOT com
Subject: RE: [nv-l] Switch Analyzer daemon error.






Hi Greg.

Thanks for you answer.

Right Now I don't have the CD 1.2.1, and I tried to download efix, and I
didn't find any efix.

The result from ls -l /usr/lib/*crypto* is:

-rw-r--r--        1 root     root      1475000 Sep  7  2001
/usr/lib/libcrypto.a
lrwxrwxrwx        1 root     root           29  Jun 18 13:44
/usr/lib/libcrypto.so -> ../../lib/libcrypto.so.0.9.6b


Any information would be appreciated.

Thanks In Advance

Anabella Gonzalez D.
Banesco Bank.





"Gregory Crow" <crowg AT magnum-tech DOT com> con fecha 29/08/2003 12:40:26 p.m.


Destinatarios:    <Anabella_Gonzalez AT banesco DOT com>
CC:         <nv-l AT lists.tivoli DOT com>
Asunto:           RE: [nv-l] Switch Analyzer daemon error.

Anabella,
             First, I'd suggest to install 1.2.1 as it's the latest + there
is an efix
for the 1.2.1 that you should load.

The problem is most likely a missing link.  Check the readme for creating
the softlink that is missing for libcrypto.

If you can't find it - send us back the results from
ls -l /usr/lib/*crypto*

We can check to see if it's the link issue.

Greg
-----Original Message-----
From: Anabella_Gonzalez AT banesco DOT com
[mailto:Anabella_Gonzalez AT banesco DOT com]
Sent: Thursday, August 28, 2003 16:07
To: nv-l AT lists.tivoli DOT com
Subject: [nv-l] Switch Analyzer daemon error.


Red Hat Intel 7.2
Netview 7.1.3
Framework 4.1
Switch Analyzer 1.2

We were testing Switch Analyzer on linux, the installation worked fine, but
when it finished, the daemon itsl2 was not running, I ran: ovstart itsl2
and displayed the following error: exit status: exit(127), and the daemon
it's not running.

I checked the log directory, but it's empty.

What can we do?????

Any information would be appreciated.

Thanks In Advance

Anabella Gonzalez D.
Banesco Bank.



---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)












---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)