In answer to your question : " Why should the collection be deferrd for one
hour?"
if a node does not reply to the SNMP Get, the snmpCollect daemon defers the
following Get on that node for a "defer time" . The default is 1 hour. It
can be changed by the -D switch on snmpCollect.
At 10:23 AM 15/08/2003 +0800, Haibo Yang wrote:
>Hi John Bruer,
>
> Thank you for your help. From snmpcol.trace, there are really some
useful information. I have noticed several log about collecting the
specific NOKIA MIB value. But I don't understand it really, let alone how
to debug it.
>########### Beginning##########
>The log says:
>Thur. Aug 14 15:29:39 : Deferring SNMP collection of NokiaCPUUtility.0 on
> 10.10.30.200 60 minutes (1.00 hours). Consecutive deferral #1.
>
>################ End #################
>
>Why should the collection be deferrd for one hour? and What the meaning of
"Consecutive Deferral #1"? Are there going to be #2, #3, etc.?
>
>In command line, simply using the command "snmpget 10.10.30.200
.1.3.6.1.4.1.94.1.21.1.7.1.0" or "SNMPWALK 10.10.30.200
.1.3.6.1.4.1.94.1.21.1.7.1", the value can be retrived. There is no doubt
about it. But why the silly mib data collector can't?
>
>Scatching my head , now , is not enough for me, I'd like to scatch the
head of MIB-DATA_COLLECTOR!!!
>
>
>Best Regards
>
>
>Bruce Yang
>0086-755-267432743
>hbyang AT sysway DOT com
>
>
>
>======= 2003-08-14 06:59:00 ÄúÔÚÀ´ÐÅÖÐдµÀ£º=======
>
>>"Haibo Yang" <hbyang AT sysway DOT com> writes:
>>> Hello, list.
>>>
>>> Netview 7.1.3 on Win2000 Pro with Pack 2
>>>
>>>
>>> I have modified \usr\ov\conf\snmpcol.conf and a new entry was added
>>> to collect "the current percetage of CPU untiliztion". The following
>>> is the content of the snmpcol.conf
>>>
>>> MIB .1.3.6.1.4.1.94.1.21.1.7.1 0 NokiaCPUUtility units TIMETICKS R
ibmbackup
>>> C 10.10.30.200 0xffffffff 120 > 40.000000 <= 35.000000 s 58720263
>>>
>>> The last entry here is supposed to collect the cpu utility data from
>>> nokia box.
>>>
>>> In command line, I can use \usr\ov\bin\snmpwalk or snmpget to get
>>> this specific mib value.
>>
>>Just to verify, make sure you can do those two without specifying a
>>community string on the command line. This ensures NetView is using
>>the right community string.
>>
>>> My problem is that In the MIB Data Collector window, when I click
>>> the "data" button, it is empty!!! You know, the collecting interval
>>> is 120 seconds and there is a long enough period of time for netview
>>> to get some data.
>>>
>>> Any one here can tell me why there is no data collected by the MIB
>>> Data Collector? Are there some ways to make it collect the MIB value
>>> I want?
>>
>>I've fought with such problems in the past myself...often scratching
>>my head as to why it was occuring because everything looked fine, yet
>>no data ever showed up.
>>
>>At least in the AIX version, there's a log file that's pretty helpful
>>for debugging this though. /usr/OV/logs/snmpCol.trace
>>
>>You may have to toggle it on. In AIX, that's done through
>>serversetup. YMMV, and I am not familiar with the windows product.
>>
>>--
>>jb
>
>= = = = = = = = = = = = = = = = = = = =
>
>
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
>For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com
>
>*NOTE*
>This is not an Offical Tivoli Support forum. If you need immediate
>assistance from Tivoli please call the IBM Tivoli Software Group
>help line at 1-800-TIVOLI8(848-6548)
>
Joe Fernandez
Kardinia Software
jfernand AT kardinia DOT com
http://www.kardinia.com
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|
