nv-l

[nv-l] Collecting SNMPv2 Data from Nokia box

2003-08-14 00:48:28
Subject: [nv-l] Collecting SNMPv2 Data from Nokia box
From: "Haibo Yang" <hbyang AT sysway DOT com>
To: "nv-l AT lists.tivoli DOT com" <nv-l AT lists.tivoli DOT com>
Date: Thu, 14 Aug 2003 12:49:35 +0800
Hello, list.

Netview 7.1.3 on Win2000 Pro with Pack 2


I have modified \usr\ov\conf\snmpcol.conf and a new entry was added to collect 
"the current percetage of CPU untiliztion". The following is the content of the 
snmpcol.conf

############ The beginning##############
 #
# SNMP Collect Configuration File
# Created by Tivoli NetView Collections on 星期四 八月 14 11:39:16.0 2003
#
# WARNING: All decimal points in this file must be represented
# by the '.' character.
#
MIB .1.3.6.1.2.1.2.2.1.11 .* ifInUcastPkts pkts/sec COUNTER S ibmbackup

W 10.10.0.* 0xffffffff 3600 > 10000.000000 <= 50.000000 % s 58720263

MIB .1.3.6.1.2.1.2.2.1.17 .* ifOutUcastPkt units/sec COUNTER S ibmbackup

W 10.10.0.* 0xffffffff 3600 > 10000.000000 <= 50.000000 % s 58720263

MIB .1.3.6.1.2.1.2.2.1.14 .* ifInErrors errors/sec COUNTER R ibmbackup

C smartset:Routers 0xffffffff 1800 > 10.000000 <= 90.000000 % s 58720263

MIB .1.3.6.1.2.1.2.2.1.20 .* ifOutErrors errors/sec COUNTER S ibmbackup

W 10.10.0.* 0xffffffff 3600 > 10.000000 <= 90.000000 % s 58720263

MIB .1.3.6.1.2.1.11.1 0 snmpInPkts units/sec COUNTER R ibmbackup

W 10.10.0.* 0xffffffff 3600 > 10.000000 <= 70.000000 % s 58720263

MIB BandwidthUtilHdx .* BandwidthUtilHdx units EXPRESSION R ibmbackup

C smartset:Routers 0xffffffff 1800 > 20.000000 <= 75.000000 % s 58720263

MIB .1.3.6.1.4.1.9.2.1.58 0 avgBusy5 units INTEGER R ibmbackup

C smartset:CiscoDevices 0xffffffff 1800 > 90.000000 <= 75.000000 % s 58720263

MIB .1.3.6.1.4.1.9.2.1.46 0 bufferFail units INTEGER R ibmbackup

C smartset:CiscoDevices 0xffffffff 1800 > 0.000000 <= 0.000000 x% s 58720263

MIB .1.3.6.1.2.1.6.9 0 tcpCurrEstab units GAUGE R ibmbackup

C smartset:WebServers 0xffffffff 1800 > 0.000000 <= 0.000000 xA s 58720263

MIB .1.3.6.1.4.1.94.1.21.1.7.1 0 NokiaCPUUtility units TIMETICKS R ibmbackup

C 10.10.30.200 0xffffffff 120 > 40.000000 <= 35.000000 % s 58720263
##############the end#######################

The last entry here is supposed to collect the cpu utility data from nokia box.

In command line, I can use \usr\ov\bin\snmpwalk or snmpget to get this specific 
mib value. And from Netview console, In the MIB Data Collector window, I can 
see the new entry. Using mibborwerV2, I can aslo walk down the MIb tree to the 
mib id and get the value and graph it corretlly.


My problem is that In the MIB Data Collector window,  when I click the "data" 
button, it is empty!!! You know, the collecting interval is 120 seconds and 
there is a long enough period of time for netview to get some data.

Any one here can tell me why there is no data collected by the MIB Data 
Collector? Are there some ways to make it collect the MIB value I want?

Thank you very much in advance.

With best regards

Bruce Yang
0086-755-26743243
hbyang AT sysway DOT com




        Haibo Yang
        hbyang AT sysway DOT com
          2003-08-14



---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)