Ahhh you are on 7.1.1, no it is not available....only 7.1.3 and later...

Paul



Brian W Green wrote:

I have just tried to run nvmaputil, but it is not in my /usr/OV directory.
Does anyone know where I can get it, if it is available for my system?  I am
running NV 7.1.1 on AIX 4.3.3

Thanks,

Brian

-----Original Message-----
From: Paul [mailto:pstroud AT bellsouth DOT net]
Sent: Friday, July 25, 2003 5:50 PM
To: Qureshi, Fawad
Cc: Liew, Wen; nv-l AT lists.tivoli DOT com
Subject: Re: [nv-l] Deletion of objects from normal topology DB


Fawad,
Having netviewd up and running in read-write mode should fill the
requirement.
nvmaputil.sh was designed with netviewd in mind.

Paul



Qureshi, Fawad wrote:

No. Having netviewd up does not help.

IBMers, any insight ??

Fawad

-----Original Message-----
From: Qureshi, Fawad [mailto:Fawad.Qureshi AT ssa DOT gov]
Sent: Friday, July 25, 2003 3:04 PM
To: Liew, Wen
Cc: nv-l AT lists.tivoli DOT com
Subject: RE: [nv-l] Deletion of objects from normal topology DB


we always keep a rw map open. I am not sure but maybe running netviewd can
eliminate this need. I am going to test this out real quick here.

Fawad

-----Original Message-----
From: Liew, Wen [mailto:Wen.Liew AT atcoitek DOT com]
Sent: Friday, July 25, 2003 2:55 PM
To: nv-l AT lists.tivoli DOT com
Subject: RE: [nv-l] Deletion of objects from normal topology DB


Thanks Fawad,

nvmaputil works like a charm but is there a way to for this command to
function without a map being open?  Am I correct to assume that there are
people out there with a RW map continuously open?

WEN


-----Original Message-----
From: Qureshi, Fawad [mailto:Fawad.Qureshi AT ssa DOT gov]
Sent: Friday, July 25, 2003 12:40 PM
To: Liew, Wen; nv-l AT lists.tivoli DOT com
Subject: RE: [nv-l] Deletion of objects from normal topology DB


Wen,

nvmaputil --delete <selection name>

above will delete the object from command line. make sure you have a rw map
open when you run this command, else it will fail.

Fawad

-----Original Message-----
From: Liew, Wen [mailto:Wen.Liew AT atcoitek DOT com]
Sent: Friday, July 25, 2003 1:33 PM
To: nv-l AT lists.tivoli DOT com
Subject: [nv-l] Deletion of objects from normal topology DB




Hi List,

I am trying to automate some of the maintenance for Netview.  Does anyone
know if there is a command line method of deleting objects from the normal
topology DB other than using the GUI?

Thanks,
WEN

---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)

---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)