nv-l

RE: [nv-l] Discovering problem

2003-03-14 09:48:40
Subject: RE: [nv-l] Discovering problem
From: "D'Apice, Dominic" <D.D'Apice AT SAQ.qc DOT ca>
To: "Netview - List (E-mail)" <nv-l AT lists.tivoli DOT com>
Date: Fri, 14 Mar 2003 09:46:26 -0500
Thanks James i will

Dominic

-----Message d'origine-----
De : James Shanks [mailto:jshanks AT us.ibm DOT com]
Envoyé : March 14, 2003 9:40 AM
À : nv-l AT lists.tivoli DOT com
Objet : RE: [nv-l] Discovering problem


Only initial seeds will force discovery.  Discovery proceeds by reading 
the arp cache of the NetView box.  If there are no boxes outside your own 
subnet in there, then that's all NetView will find initially.  You can 
speed up discovery by putting some key devices in the seed file as initial 
discovery nodes; routers are good choices.  Otherwise just use any box in 
a subnet outside your own.   Putting in a range to limit discover does 
just that.  It will keep netmon from adding those nodes to the database, 
but it won't force him to go looking for anything.   That's what discovery 
seeds do.

This is basic  stuff and not unique to Linux.  It's all in the books and 
has been for years. 

James Shanks
Level 3 Support  for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group




"D'Apice, Dominic" <D.D'Apice AT SAQ.qc DOT ca>
03/14/2003 08:59 AM

 
        To:     "'Anabella_Gonzalez AT banesco DOT com'"
<Anabella_Gonzalez AT banesco DOT com>, 
"Netview - List (E-mail)" <nv-l AT lists.tivoli DOT com>
        cc: 
        Subject:        RE: [nv-l] Discovering problem



Hi Anabella, i did not put any address in the "initial discovery seeds"
field.

I only put some address in the "limit discovery / limit by ip address /
include field"

Do i must put some address in the "initial discovery seeds" field ?

Thanks
Dominic
-----Message d'origine-----
De : Anabella_Gonzalez AT banesco DOT com
[mailto:Anabella_Gonzalez AT banesco DOT com]
Envoyé : March 14, 2003 7:52 AM
À : dapiced AT sympatico DOT ca; nv-l AT lists.tivoli DOT com
Objet : Re: [nv-l] Discovering problem



Hi, Dominic.

You need, set, in seed file (netmon.seed), in the menu options, Limit
Discovery to this seed file.

(See attached file: SeedFile.jpg)






"Dominic D'Apice" <dapiced AT sympatico DOT ca> con fecha 14/03/2003 08:34:57

Destinatarios:    netview list good <nv-l AT lists.tivoli DOT com>
CC:
Asunto:           [nv-l] Discovering problem



Hi, netview 7.1.3 with fixpack 1 on linux RH

I installed Netview and set correctly the discovery setting (see file)

but netview only discover my local network (192.168.1).

what should i do, if i would like Netview discover some Internet subnet
or other network ?

Thanks
Dominic






(See attached file: dom.jpg)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)




---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)





---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)


---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)


<Prev in Thread] Current Thread [Next in Thread>