nv-l

RE: [nv-l] nv.carriers and skytel

2002-10-28 08:07:07
Subject: RE: [nv-l] nv.carriers and skytel
From: "Bursik, Scott {PBSG}" <Scott.Bursik AT pbsg DOT com>
To: "'Milburn, Shane B'" <shane.b.milburn AT intel DOT com>, "'nv-l AT lists.tivoli DOT com'" <nv-l AT lists.tivoli DOT com>
Date: Mon, 28 Oct 2002 07:07:07 -0600
I don't know about the 2 way pagers, but this is our working configuration
for Skytel. 



Carrier: skytel
        Modem phone #: 1-800-679-2778
        Numeric IDs accepted on modem line: N
        DTMF phone #: 1-800-759-7243
        Max. message length: 190
        Max. digits in alphanumeric pager #: 8
        Max. blocks/transaction: 1
        Max. transactions/call: 7
        Baud rate: 300
        Parity: E
        Data bits: 7
        Stop bits: 1
        Password:
        Protocol: TAP

Scott Bursik
Event Systems Management
Pepsico Business Solutions Group
(972) 334-3757
scott.bursik AT pbsg DOT com

-----Original Message-----
From: Milburn, Shane B [mailto:shane.b.milburn AT intel DOT com] 
Sent: Saturday, October 26, 2002 12:27 AM
To: 'nv-l AT lists.tivoli DOT com'
Subject: [nv-l] nv.carriers and skytel


We are moving to the Skytel 2way pagers with the 10 digit pin (i.e
877588xxxx). I'm trying to get netview to page using this but I'm having
some problems.

I have the following settings in my nv.carriers.

Carrier: skytel
        Modem phone #: 1-800-679-2778
        Numeric IDs accepted on modem line: N
        DTMF phone #: 1-800-759-7243
        Max. message length: 500
        Max. digits in alphanumeric pager #: 10
        Max. blocks/transaction: 1
        Max. transactions/call: 7
        Baud rate: 300                  <----(also tried 9600 for this
setting)
        Parity: E
        Data bits: 7
        Stop bits: 1
        Password:
        Protocol: TAP

Then I issue the following command: nvpage [email protected] "test to shane"
But the page never makes it. If I send the same page to my metrocall page
from this system it works. So I know something is wrong with my nv.carriers
file but I'm not sure what. 

Anyone have any ideas? I've also attached my nvpager.alog file. The
nvpager.errlog is empty so I didn't attach it.

Any help would be appreciated. 

   <<nvpagerd.ZIP>>  <<nvpager.ZIP>> 
thanks,
-shane
--
Shane B Milburn
Sr. Network Engineer & Unix/Network Domain Lead,
LTD Automation, Intel
Phone: 503.613.8501
Pager: 877-588-1327 or shane.b.milburn AT skytel DOT com
Email: shane.b.milburn AT intel DOT com


<Prev in Thread] Current Thread [Next in Thread>