Avikam,
I have found out the manual 'Netview Installation and Configuration' for
version 5 (SC31-8442-00). On page 8-16 it says to use the exclamation mark to
exclude some nodes from discovery. Here is what the manual for version 5 says:
"Specify nodes that you do not want netmon to discover by preceding specific
nodes or groups of nodes with an exclamation mark (!). If a group of nodes is
specified without the ! operator and an overlapping group of nodes is specified
with the ! operator, the ! operator has the higher priority. Nodes in the
overlapping range will not be discovered. If you have listed specific nodes
in the seed file that also fall within a range of nodes specified with the !
operator, the specific nodes have the higher priority. The specific nodes
will be discovered."
perhaps also make sure netmon is started with the '-s' switch telling him to
take the seed file into account (-s<seedfile>).
Hope this helps.
Bernard.
> -----Original Message-----
> From: avikam AT nioi.gov DOT il [SMTP:avikam AT nioi.gov DOT il]
> Sent: lundi 7 octobre 2002 13:13
> To: nv-l AT lists.tivoli DOT com
> Subject: RE: [nv-l] Exclude nodes in seedfile
>
> Thank you Bernard.
> It WORKED fine with my Netview V6.02 AIX 4.3.3.
>
> Now, I have another Netview V5.1.2 AIX 4.3.2 - here this is NOT WORKING at
> all.
> do you know how to exclude nodes in seedfile of Netview V5.1.2?
>
> Thanks,
>
> Avikam.
>
> -----Original Message-----
> From: bernard.baudoux AT fortisbank DOT com [mailto:bernard.baudoux AT
> fortisbank DOT com]
> Sent: Monday, October 07, 2002 9:28 AM
> To: 'nv-l AT lists.tivoli DOT com'
> Subject: RE: [nv-l] Exclude nodes in seedfile
>
>
> Avikam,
>
> before discovery add an entry in the seedfile prefixed with an exclamation
> point (!).
> ex:
>
> !10.10.10.10 #prevents discovery of node 10.10.10.10
> You can use wildcards.
>
> beware this will tell netmon not to discover the node, it will not tell him
> to delete the node if it already exists in the db.
>
> Regards,
> Bernard Baudoux.
>
>
> > -----Original Message-----
> > From: avikam AT nioi.gov DOT il [SMTP:avikam AT nioi.gov DOT il]
> > Sent: lundi 7 octobre 2002 09:40
> > To: nv-l AT lists.tivoli DOT com
> > Subject: [nv-l] Exclude nodes in seedfile
> >
> > Hi to all,
> >
> > Netview V6.02 AIX 4.3.3 - How can I exclude nodes and/or group of nodes in
> > the seedfile?
> >
> > Thanks,
> >
> >
> > Avikam Dar
> >
> > Local Networks Department
> > Email: avikam AT nioi.gov DOT il
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
> > For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com
> >
> > *NOTE*
> > This is not an Offical Tivoli Support forum. If you need immediate
> > assistance from Tivoli please call the IBM Tivoli Software Group
> > help line at 1-800-TIVOLI8(848-6548)
>
> This email and any attached files are confidential and may be legally
> privileged.
> If you are not the intended recipient, any disclosure, reproduction,
> copying, distribution, or other dissemination or use of this communication
> is strictly prohibited.
> If you have received this transmission in error please notify the sender
> immediately and then delete this email.
> Email transmission cannot be guaranteed to be secure or error free as
> information could be intercepted, corrupted, lost, destroyed, arrive late or
> incomplete, or contain viruses.
> The sender therefore is in no way liable for any errors or omissions in the
> content of this message, which may arise as a result of email transmission.
> If verification is required, please request a hard copy.
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
> For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com
>
> *NOTE*
> This is not an Offical Tivoli Support forum. If you need immediate>
> assistance from Tivoli please call the IBM Tivoli Software Group
> help line at 1-800-TIVOLI8(848-6548)
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
> For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com
>
> *NOTE*
> This is not an Offical Tivoli Support forum. If you need immediate
> assistance from Tivoli please call the IBM Tivoli Software Group
> help line at 1-800-TIVOLI8(848-6548)
This email and any attached files are confidential and may be legally
privileged.
If you are not the intended recipient, any disclosure, reproduction,
copying, distribution, or other dissemination or use of this communication
is strictly prohibited.
If you have received this transmission in error please notify the sender
immediately and then delete this email.
Email transmission cannot be guaranteed to be secure or error free as
information could be intercepted, corrupted, lost, destroyed, arrive late or
incomplete, or contain viruses.
The sender therefore is in no way liable for any errors or omissions in the
content of this message, which may arise as a result of email transmission.
If verification is required, please request a hard copy.
<<application/ms-tnef>>
|
