Netview for AIX 7.1.1 - AIX 4.3.3

Hi all,

I have following statements in my location.conf:

BAROCC 0 City

BABackbone 0 Site3 BAROCC
BIBackbone 0 Site3 BIROCC
CHBackbone 0 Site3 CHROCC

BA-ROCC-10Nets  10.1.240.0      Site3   BABackbone
BA-ROCC-10Nets  10.1.32.0       Site3   BABackbone

BABackbone      10.108.0.0      City    BAROCC
BABackbone      10.108.112.0    City    BAROCC

Netveiw documentation tells me that if I use 0 in AddressPattern field (as I
have in my symbol BABackbone), then no networks should exist under this
symbol. As can be seen from the above statements, I am specifying 10.108.0.0
and 10.108.112.0 networks under this symbol. This should not work if my
interpretation of the Netview documentation is correct. I am unable to
verify this as my map is almost unreadable and undecipherable. So my
questions are: Would this work? If not, can I replace the 0 in
AddressPattern with something else so I am able to specify networks as well
as sub-symbols / sub-containers? Thanks.

Cheers,

Fawad Qureshi
RSIS - DNE
410-965-4413