Thanks, Don, but this is not the correct MIB variable.  It does not give the 
same information.  What I am looking for is the table that gives the MAC 
addresses of the devices that are connected to the individual Ethernet ports 
[as given by the show mac command].

Just to further clarify, the switch is a Cisco 3548.

Mahesh

>>> "Davis, Donald" <donald.davis AT firstcitizens DOT com> 03/14/02 08:55AM >>>
You probably want the MIB-2 variable that returns the ARP cache.

snmpwalk [target] .1.3.6.1.2.1.4.22.1.2

Don Davis

-----Original Message-----
From: Mahesh Tailor [mailto:MTailor AT carilion DOT com] 
Sent: Thursday, March 14, 2002 8:43 AM
To: nv-l AT lists.tivoli DOT com 
Subject: [nv-l] Slightly off the subject


Does anyone what the MIB variable is to obtain the information provided by
the show mac command on a Cisco 3500 switch?

Thanks.

Mahesh


---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com 
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com 

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)


------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and are 
intended solely for the use of individual or entity to whom they are addressed. 
If you are not the intended recipient or the person responsible for delivering 
the electronic mail to the intended recipient, be advised that you have 
received this electronic mail in error and that any use, dissemination, 
forwarding, printing, or copying of this electronic mail is strictly 
prohibited. If you have received this electronic mail in error, please 
immediately notify the sender by return mail.

==============================================================================