[nv-l] nvdbformat problem

2002-01-25 11:59:15
Subject: [nv-l] nvdbformat problem
From: "Westphal, Raymond" <RWestphal AT erac DOT com>
To: "'nv-l AT lists.tivoli DOT com'" <nv-l AT lists.tivoli DOT com>
Date: Fri, 25 Jan 2002 10:59:15 -0600
Hello Everyone.

NV 6.0.3 on AIX

I found a problem with a nvdbformat input file. The purpose of the file is
to list all routers with TopM Interface List contains "Frame Relay". Here is
the input file:

SELECTRULE:TopM Interface List~Frame Relay
SELECTFIELD:1:Selection Name

nvdbformat only returns the devices with "Frame Relay" in the 1st line of
the TopM Interface List. For example, this ovobjprint shows a device that
would NOT be 
found by the nvdbformat command and input file above. (I removed most of the

OBJECT: 14430443

        FIELD ID        FIELD NAME                      FIELD VALUE
        10              Selection Name
        11              IP Hostname
        14              OVW Maps Exists                 1       Cisco
        94              isMLM                           FALSE
        95              isSYSMON                        FALSE
        96              isSIA                                   FALSE
        97              isManager                       FALSE
        99              isSLM                           FALSE
        100             isSIAOS2                        FALSE
        104             TopM Interface Count            4
        110             TopM Interface List             "Ethernet0/0 Up 0x0002B94D1AA0  ethernet csmacd     "
                                                        "Serial0/0.10 Up <None>          Frame Relay         "
                                                        "Serial0/0.20 Up <None>          Frame 

Any suggestions on now to create the correct input file?

Thanks in advance.

Ray Westphal
Enterprise Rent-A-Car

<Prev in Thread] Current Thread [Next in Thread>