Eliza,
I don't have a real 'answer', but this is my experience:
I've once tried to use the tme version of the adapter, as you are trying to
do, I did not succeed.
Using the non-tme version never causes me any problems, so I always use
this setup.
HTH,
Bernard
At 12:00 21-12-2001 -0800, you wrote:
>Hi,
>
>Can someone help me to figure out the problem? Thanks
>in advance.
>
>---------------------------
>My environment:
>
>Spoke TMR server 3.6.2, (NT)/Netview Server 6.0.1 (NT)
>TEC Netview adapter 3.6 are on one machine which is my
>Netview server.
>
>Hub TMR 3.6.2 (NT)
>
>TEC 3.6.2 (NT) in hub TMR.
>-----------------------------
>I have been tring to send netview events to the TEC
>server in the hub TMR, but the behavior attribute of
>"ovstatus tecad_nv6k" always shows:
>started... then not running.
>I looked at log file from the tecio module configured
>in tecad_nv6k.err and saw the following error message.
>
>
>Fri Dec 21 14:14:03 2001 FATAL: TECIO , err 01,
>ibtecad/tec_io.c line 0516: C
>annot create EIF handle. Please check the .conf file.
>
>I know this message is related to the ServerLocation
>in tecad_nv6k.conf, but I configured the
>ServerLocation:
>
> ServerLocation=@EventServer#hub_tmr-region
>
>I even tried @EventServer, Server IP, Server hostname
>but to the same error message. (I knew these did not
>make sense to me, but I just tried)
>
>I have done:
>
>1. wlsconn on both hub tmr and spoke tmr/Netview
>I saw two way interconnected tmrs
>
>2. odadmin odlist on both tmr and they are fine
>
>3. wupdate -r EventServer hub_tmr-region on the
>spoke tmr/netview server,
>
>4. wlookup -ar EventServer
>shows the EventServer with the hub tmr region oid
>
>5. wpostemsg OV_IF_Down events works fine from a CLI,
>tec processed the OV_IF_Down messages, the events were
>displayed on TEC Console
>
>but I still can't bring up tecad_nv6k. Did I miss
>anything?
>
>I installed TEC on the spoke tmr/Netview server once,
>but I did wdel /Library/EventServer and wregister -u
>-r
>EventServer EventServer, wchkdb, so the spoke
>tmr/netview now only sees the tec server in hub tmr
>and wpostemsg works fine.
>
>Did anyone get this error before. Does any one know
>what ibtecad/tec_io.c line 0516 is trying to check?
>
>
>
>Eli
>
>
>
>
>__________________________________________________
>Do You Yahoo!?
>Check out Yahoo! Shopping and Yahoo! Auctions for all of
>your unique holiday gifts! Buy at http://shopping.yahoo.com
>or bid at http://auctions.yahoo.com
>_________________________________________________________________________
|
