Date: Tue, 20 Nov 2001 12:39:02 +0100

2001-11-20 06:38:52
Subject: Date: Tue, 20 Nov 2001 12:39:02 +0100
From: "Alvarez Lavin, Cristina" <calvarezl AT iberdrola DOT es>
To: nv-l AT lists.tivoli DOT com
Date: Tue, 20 Nov 2001 05:38:52 -0600
Hi list, 
I,ve got a problem with loading MIBS, I think. My problem is:

I need monitoring the digital and analogic calls in a Cisco AS5300, the MIB
wasn`t loaded in Netview, I found it (CISCO-POP-MGMT-MIB-V1SMI[1].my) and
loaded it.
Now, I can ask for the with the Mib Browser
in Tools option using the SNMPv1/SNMPv2. The data I collect is  1 digital
call and 12 analogic calls.

I`ve tried to use the Data Collection & Thresholds:SNMP aplication in Tools
option, for collecting values in this MIB, and generate events when calls
are up to 20.

These are the steps I made:
        * open the Data Collection & Thresholds:SNMP...  aplication in Tools
        * Press the Add button in "Mibs Objects Configured for Collection"
        * And put the mib oid ( ) in the Mib
Object ID textArea
        * Press the Apply
        * Select the node, polling interval, instances and press OK
        * Press apply button

The Data Collection should collect information and generate events, but  it
doesn`t. The snmpCollect daemon stops with the following 

exit status: exit (1) 
last message: Error reading configuration file /usr/OV/conf/snmpCol.conf :No
such expresion "" at

My question is, why are we able to ask about the mib using the mib browser
and not with the Data Collection? 
Any suggestions?

<Prev in Thread] Current Thread [Next in Thread>