nv-l

Réf. : Re: Remove Workstation from Map

2001-11-12 15:19:29
Subject: Réf. : Re: Remove Workstation from Map
From: bducharme AT avdl DOT com
To: nv-l AT lists.tivoli DOT com
Date: Mon, 12 Nov 2001 15:19:29 -0500
How to define Smartsets
that include workstation and non-snmp equipment ?

Benoit





"Leslie Clark" <lclark AT US.IBM DOT COM>@tkg.com le 2001-11-12 10:57:04

Veuillez répondre à IBM NetView Discussion <nv-l AT tkg DOT com>

Envoyé par :   owner-nv-l AT tkg DOT com


Pour :    IBM NetView Discussion <nv-l AT tkg DOT com>
cc :

Objet :   Re: [NV-L] Remove Workstation from Map


This is done with the seedfile. There are a couple of ways.

First, if you have a good addressing scheme, you should exclude them
by address range. This is the best performer. If you have assigned DHCP
address ranges, put them in your seedfile like this:

!10.*.23-150.40-255

If you don't have a tidy addressing scheme, or if you also have a lot
of workstations that don't abide by the rules, you can exclude them by
snmp sysObject id. Since most of them will be either non-snmp, or
Microsoft, you can exclude them like this;

[email protected] 0                                 # excludes non-snmp
[email protected] 1.3.6.1.4.1.311.*      # excludes MS

The second one would also exclude servers, so you would then add
in an explicit list of the servers that you do want to allow.

Make sure netmon is using the seedfile, and has re-read it.

To get them out of the map after updating the seedfile you can
either rediscover the entire network, or you can locate and
delete them. To locate and delete them, define Smartsets
that include them. Then you can grab them easily and delete
them. If there are a lot, this can take quite a while, but if you have
done a lot of map customization it will be worth the wait. I prefer
to stop netmon during the delete, and after all of the events for
the deletions have come in, do an ovtopofix -a.


Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit




                    [email protected]
                    .com                 To:     nv-l AT tkg DOT com
                    Sent by:             cc:
                    [email protected]       Subject:     [NV-L] Remove
Workstation from Map
                    .com


                    11/12/01 10:10
                    AM
                    Please respond
                    to IBM NetView
                    Discussion





How can we remove and prevent Workstation from getting in the Netview map ?

Thanks

Benoit

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l



_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


<Prev in Thread] Current Thread [Next in Thread>