This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
here is the PMR on mib loading Dell / Sun mibs. I like the mibloader.sh -
good stuff (A little slower than xnmloadmib but nothing obnoxious)
*** T1S2R3V4
*** Electronic creation by customer via Tivoli Customer Support Web Site
*** Please contact customer by Electronic
***
*** Userid: bars02
*** Email Address: scott_barr AT csgsystems DOT com
*** Fax Number: 402-431-7413
*** 24 Hour Phone Number:
***
Problem Details
.
Abstract:
TivWeb: Unable to load mibs for web console
.
System Type: Sun
System Model: Sunblade 100
Other related devices:
.
Operating System: Solaris 2.3+
Product Group: NetView for UNIX
Fileset or Version: v7.1
.
Environment:
.
Problem Description:
Greetings, we are attempting to load MIBs for the Dell Openmanage
connection for Tivoli NetView v1.3
The MIBs all load properly under xnmloadmib but most of them cannot be
loaded on the web console due to the following typical error:
=======================================================================
# mibloader.sh --load symmib.mib --commit
Loading Files
........................................................................
..............................................
Parsing the loaded MIBs together with MIBs selected for loading.
Processing File: symmib.mib
ibm.nways.jdm.mib.TokenMgrError: Lexical error at line 2, column 7.
Encountered: "_" (95), after : ""
Errors were encountered parsing MIBs. The changes will not be committed.
=======================================================================
Top Section of MIB attempting to be loaded:
-- MIB generated by mibgen version 1.0
SYMMIB_MIB-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises
FROM RFC1155-SMI
InternationalDisplayString
FROM HOST-RESOURCES-MIB
OBJECT-TYPE
FROM RFC-1212
Counter,Gauge,
DisplayString
FROM RFC1213-MIB
Dmi_Date,Dmi_Integer64,
dmiEventDateTime,dmiCompId,dmiEventSeverity,
dmiEventStateKey,dmiEventAssociatedGroup,
dmiEventSystem,dmiEventSubSystem
FROM DMTF-DMI;
=======================================================================
Notice the error message points out line 2, column 7 which, has no data
in it. (Line 2 is blank)
Please advise on how to get these MIBs load. The mibs can be found at:
http://support.dell.com/us/en/filelib/download/index.asp?fileid=R34408
This file is a tar of traps and mibs for NetView AIX (we are running on
Solaris)
Action Taken: Sending to incoming product queue.
am1108tiv
Action Taken:
Spoke with Customer Rep and he has several Dell mibs that are loading
fine through the normal NetView mibloader GUI. But fail when using the
mibloader.sh script. From some testing here it appears there is a
problem with parsing the "_" character. I am not 100% sure of this. I
will continue to look into this.
.
Action Plan:
Researching.
Action Taken:
Attempted to get more information about the error from logging. No
additional useful information was gained from there. I have both the mib
file and mibloader log with debug turned on, but cannot reach dfs at
this time. If you pick up this call, let me know and I'll send you the
information via email.
.
Action Plan:
Passing to the backend for further diagnosis.
here
is the PMR on mib loading Dell / Sun mibs. I like the mibloader.sh - good stuff
(A little slower than xnmloadmib but nothing obnoxious)
***
T1S2R3V4
*** Electronic creation by customer via Tivoli Customer Support Web
Site *** Please contact customer by
Electronic
***
*** Userid:
bars02
*** Email Address:
scott_barr AT csgsystems DOT com
*** Fax Number:
402-431-7413
*** 24 Hour Phone
Number:
***
Problem
Details
.
Abstract:
TivWeb: Unable to load mibs for web
console
.
System Type:
Sun
System Model: Sunblade
100
Other related
devices:
.
Operating System: Solaris
2.3+
Product Group: NetView for
UNIX
Fileset or Version:
v7.1
.
Environment:
.
Problem
Description:
Greetings, we are attempting to load MIBs for the Dell
Openmanage connection for Tivoli NetView
v1.3
The MIBs all load properly under xnmloadmib but most of them cannot be
loaded on the web console due to the following typical
error:
=======================================================================
# mibloader.sh --load symmib.mib
--commit
Loading
Files
........................................................................ ..............................................
Parsing the loaded MIBs together with MIBs selected for
loading. Processing File:
symmib.mib
ibm.nways.jdm.mib.TokenMgrError: Lexical error at line 2, column
7. Encountered: "_" (95), after :
""
Errors were encountered parsing MIBs. The changes will not be
committed. =======================================================================
Top Section of MIB attempting to be
loaded:
-- MIB generated by mibgen version
1.0
SYMMIB_MIB-MIB DEFINITIONS ::=
BEGIN
IMPORTS
enterprises
FROM
RFC1155-SMI
InternationalDisplayString
FROM
HOST-RESOURCES-MIB
OBJECT-TYPE
FROM
RFC-1212
Counter,Gauge,
DisplayString
FROM
RFC1213-MIB
Dmi_Date,Dmi_Integer64,
dmiEventDateTime,dmiCompId,dmiEventSeverity,
dmiEventStateKey,dmiEventAssociatedGroup,
dmiEventSystem,dmiEventSubSystem
FROM
DMTF-DMI;
=======================================================================
Notice the error message points out line 2, column 7 which, has no data
in it. (Line 2 is
blank)
Please advise on how to get these MIBs load. The mibs can be found at:
http://support.dell.com/us/en/filelib/download/index.asp?fileid=R34408
This file is a tar of traps and mibs for NetView AIX (we are running on
Solaris) Action Taken: Sending to incoming product
queue.
am1108tiv Action
Taken:
Spoke with Customer Rep and he has several Dell mibs that are
loading fine through the normal NetView mibloader GUI. But fail
when using the mibloader.sh script. From some testing here it appears
there is a problem with parsing the "_"
character. I am not 100% sure of this. I will continue to look
into
this.
.
Action
Plan:
Researching. Action
Taken:
Attempted to get more information about the error from logging.
No additional useful information was gained
from there. I have both the mib file and mibloader log with debug turned on,
but cannot reach dfs at this time. If you pick up this
call, let me know and I'll send you the information via
email.
.
Action
Plan:
Passing to the backend for further diagnosis.
|