This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
Hi,
All ISDN/BRI port with both color ( pink + red) shows the same thing i.e -
Standby mode, Line protocol is down.
When I see object information of the interface with red colour, IP status is
critical(4) , whereas, in case of pink colour interface it is user1(7).
Any idea where to look into?
Regds...........Anupam
-----Original Message-----
From: Tim.Uekermann AT gecits-eu DOT com [mailto:Tim.Uekermann AT gecits-eu DOT
com]
Sent: Friday, November 09, 2001 5:26 PM
To: nv-l AT tkg DOT com
Subject: Re: [NV-L] ISDN port colour problem through Netview
Hi,
so far as I know, all ISDN Interfaces are treated as down when inactive.
Pink only shows up when the Port is manually shut down (administratively
shutdown)
We use a solution, where we catch the ISDN traps to operate a "backup icon"
which turns red when ISDN becomes active.
Gruesse - Best regards
Tim Uekermann
European Information Management
GE CompuNet Computer Distribution
Europaring 34-40, 50170 Kerpen, Germany
Phone: +49 (0) 22 73/597-7560, Fax: +49 (0) 22 73/597-186, Mobile:
01728348119
E-Mail : Tim.Uekermann AT gecits-eu DOT com
Visit us on the Internet: http://www.gecits-eu.com
This email is confidential. If you are not the intended recipient,
you must not disclose or use the information contained in it.
If you have received this mail in error, please tell us
immediately by return email and delete the document.
ananda AT bharatpetroleum DOT [email protected] on 09.11.2001 12:38:30
Please respond to nv-l AT tkg DOT com
Sent by: owner-nv-l AT tkg DOT com
To: nv-l AT tkg DOT com
cc:
Subject: [NV-L] ISDN port colour problem through Netview
--------------------------------------------------------------------------
Hi All,
I am having NetView 6.0.2 on AIX 4.3.3.
We are monitoring ISDN ports configured on different cisco routers. ISDN
port has been configures mainly as fall back arrangement.
When these ports are not in use, it goes into inactive stage.
The problem is Netview detects these inactive interface differently on
different routers. In some cases, it shows pink color ( IP status -
User1(7) and in some cases it gives red color ( IP status - Critical(4).
Because of these different behaves, other different related actions are
initiated.
We have checked the configuration for these interfaces on routers and it
appears to be the same.
Has anybody experienced the same problem? What could be the possible
reasons and where to look into?
How NetView treats ISDN/port when in inactive stage ?
Please reply ASAP.
Thanks in advance,
Regards,
Anupam
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
Hi,
All ISDN/BRI port with both color ( pink + red) shows the same thing i.e - Standby mode, Line protocol is down.
When I see object information of the interface with red colour, IP status is critical(4) , whereas, in case of pink colour interface it is user1(7).
Any idea where to look into?
Regds...........Anupam
-----Original Message-----
From: Tim.Uekermann AT gecits-eu DOT com [mailto:Tim.Uekermann AT gecits-eu DOT com]
Sent: Friday, November 09, 2001 5:26 PM
To: nv-l AT tkg DOT com
Subject: Re: [NV-L] ISDN port colour problem through Netview
Hi,
so far as I know, all ISDN Interfaces are treated as down when inactive.
Pink only shows up when the Port is manually shut down (administratively
shutdown)
We use a solution, where we catch the ISDN traps to operate a "backup icon"
which turns red when ISDN becomes active.
Gruesse - Best regards
Tim Uekermann
European Information Management
GE CompuNet Computer Distribution
Europaring 34-40, 50170 Kerpen, Germany
Phone: +49 (0) 22 73/597-7560, Fax: +49 (0) 22 73/597-186, Mobile:
01728348119
E-Mail : Tim.Uekermann AT gecits-eu DOT com
Visit us on the Internet: http://www.gecits-eu.com
This email is confidential. If you are not the intended recipient,
you must not disclose or use the information contained in it.
If you have received this mail in error, please tell us
immediately by return email and delete the document.
ananda AT bharatpetroleum DOT [email protected] on 09.11.2001 12:38:30
Please respond to nv-l AT tkg DOT com
Sent by: owner-nv-l AT tkg DOT com
To: nv-l AT tkg DOT com
cc:
Subject: [NV-L] ISDN port colour problem through Netview
--------------------------------------------------------------------------
Hi All,
I am having NetView 6.0.2 on AIX 4.3.3.
We are monitoring ISDN ports configured on different cisco routers. ISDN
port has been configures mainly as fall back arrangement.
When these ports are not in use, it goes into inactive stage.
The problem is Netview detects these inactive interface differently on
different routers. In some cases, it shows pink color ( IP status -
User1(7) and in some cases it gives red color ( IP status - Critical(4).
Because of these different behaves, other different related actions are
initiated.
We have checked the configuration for these interfaces on routers and it
appears to be the same.
Has anybody experienced the same problem? What could be the possible
reasons and where to look into?
How NetView treats ISDN/port when in inactive stage ?
Please reply ASAP.
Thanks in advance,
Regards,
Anupam
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
| 