nv-l

Re: dns/host/win2k dns and netview

2001-10-19 10:09:50
Subject: Re: dns/host/win2k dns and netview
From: "Leslie Clark" <lclark AT us.ibm DOT com>
To: nv-l AT lists.tivoli DOT com
Date: Fri, 19 Oct 2001 10:09:50 -0400
Yes,  would rediscover those nodes whose names no longer resolve.
And the fully qualified name will be used for the Selection Name, but
the map will show the name only up to the first dot. Is that not what
you are seeing?

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit


                                                                                
                  
                    "CATALINA MARTINEZ"                                         
                  
                    <CATALINA.MARTINEZ AT tlc DOT st       To:     <nv-l AT tkg 
DOT com>                        
                    ate.tx.us>                      cc:                         
                  
                    Sent by:                        Subject:     Re: [NV-L] 
dns/host/win2k dns    
                    owner-nv-l AT tkg DOT com               and netview         
                         
                                                                                
                  
                                                                                
                  
                    10/19/01 09:14 AM                                           
                  
                    Please respond to IBM                                       
                  
                    NetView Discussion                                          
                  
                                                                                
                  
                                                                                
                  



Thanks Leslie. One more question: It is best to delete the these particular
servers and have netmon rediscover them?

Management is moving away from /etc/hosts file or using Netview Box as a
dns server. They will keep win2k dns for win2k servers and
internal/external dns servers on separate boxes.

When Netview discovers devices and resolves them via a separate dns server
it puts the fully qualified name. Is there a way to shorten the name on the
map/icons?

I guess I had 2 questions.. Thanks.....:)


>>> lclark AT us.ibm DOT com 10/17/01 10:40PM >>>
That is a feature. Names are not removed when resolution stops working.
However, you will find that functions such as 'Monitor..MIB Values...System
Information' will no longer work because the commands they issue try to
resolve the Selection Name to an IP address. The same is true of lost
SNMP access. The field info will still say that it is SNMP-supported. The
moral of the story is that you should check periodically to make sure that
you have not lost function due to such external changes. I hang a simple
script off the Reports menu that can be run against a Smartset to look for
such losses by issuing an snmpget of the sysname mib variable for each
node.

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit




                    "CATALINA MARTINEZ"

                    <CATALINA.MARTINEZ AT tlc DOT st       To:     <nv-l AT tkg 
DOT com>

                    ate.tx.us>                      cc:

                    Sent by:                        Subject:     [NV-L]
dns/host/win2k dns and netview
                    owner-nv-l AT tkg DOT com



                    10/16/01 10:53 AM

                    Please respond to IBM

                    NetView Discussion






Hello,

I am running Netview 6.0.2, AIX 4.3.3, Framework 3.7.1

There are particular Win2k servers that are registered in the win2k dns but
not in our internal dns nor the /etc/host file. Ok, so I kept getting node
down/up traps because apparently netview was having problems resolving the
names.

I did the following tests:
I added 1 server to the host file to test.did a demand poll name was
updated and  all the traps stopped. Good.

Now I went and removed the name from the host file. demand poll. The named
of the server remained.

I did an nslookup no name found(forward and reverse). I did a host lookup
not found.

Question: why did the name remain on the icon label. why does netview still
recognize the name?

Thanks in advance


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l