nv-l

Re: how to add Cisco traps to NV

2001-09-04 10:57:33
Subject: Re: how to add Cisco traps to NV
From: "Leslie Clark" <lclark AT us.ibm DOT com>
To: nv-l AT lists.tivoli DOT com
Date: Tue, 4 Sep 2001 10:57:33 -0400
The length problem is not with the file being merged, it must be in
your trapd.conf already. The problem is a unix limitation in some
command (awk?) being used by the script. The same problem
occurs when you try to migrate a system that has long description
fields in the trapd.conf. There is a command on the installation CD
in the TOOLS directory (chktrapd)  for checking your trapd.conf. It will
tell you which lines are too long. Probably description fields for some
traps you have already added. Bay is especially wordy. You can edit
your existing trapd.conf and truncate the offending descriptions,
and then add them back later.

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit



                                                                                
                     
                    "CATALINA MARTINEZ"                                         
                     
                    <CATALINA.MARTINEZ AT tlc DOT st       To:     <nv-l AT tkg 
DOT com>                           
                    ate.tx.us>                      cc:                         
                     
                    Sent by:                        Subject:     Re: [NV-L] how 
to add Cisco traps   
                    owner-nv-l AT tkg DOT com               to NV               
                            
                                                                                
                     
                                                                                
                     
                    09/04/01 10:21 AM                                           
                     
                    Please respond to IBM                                       
                     
                    NetView Discussion                                          
                     
                                                                                
                     
                                                                                
                     



Hi to all,

AIX 4.3.3 Netview 6.0.2

I ran the commands as stated on Page 9 of the 6.0.2 Release notes

cd /usr/OV/conf/C
cp tapd.conf trapd.conf.orig
nvaddtrapdconf /usr/OV/newconfig/OVSNMP-RUN/trapd.conf

I got the following error when running the third command:

grep: 0652-226 Maximum line length of 2048 exceeded
Merged /usr/OV/newconfig/OVSNMP-RUN/trapd.conf into
/usr/OV/conf/C/trapd.conf

How do I increase the length? is there an easy way of finding out which
mibs where added or omitted?

Do you know if the wireless(aironet) cisco mibs are included in the file? I
need to add these mibs (wireless) but how do I do it if the length is
exceeded?

Catalina

>>> kaveh_t AT hotmail DOT com 09/03/01 11:36AM >>>
Hi Jane,

I did
nvaddtrapdconf  /usr/OV/newconfig/OVSNMP-RUN/trapd.conf

but although the NV6.0.2 Release Notes  say that
this should add
"forty-seven new enterprises and one hundred and nine new traps,
added for Cisco and Novell devices"
in Event Configuration  I could not find a single trap
under 1.3.6.1.4.1.9 which is Cisco!

That means I still don't have any Cisco traps configured.
Is there any other way to add Cisco traps
to NV, say, for Cat6509?

I tried mib2trap <mib> ... which ended up in syntax
errors in the mibs.




----Original Message Follows----
From: Jane Curry <jane.curry AT skills-1st.co DOT uk>
Reply-To: IBM NetView Discussion <nv-l AT tkg DOT com>
To: IBM NetView Discussion <nv-l AT tkg DOT com>
Subject: Re: [NV-L] how to add Cisco traps to NV
Date: Fri, 31 Aug 2001 12:06:19 +0100
MIME-Version: 1.0
Received: from [198.3.130.68] by hotmail.com (3.2) with ESMTP id
MHotMailBD58BD5800B140043894C6038244CDEE0; Fri, 31 Aug 2001 04:17:47 -0700
Received: from localhost (daemon@localhost)by westlake.tkg.com
(8.9.3/8.9.3)
with SMTP id GAA201272;Fri, 31 Aug 2001 06:10:05 -0500
Received: by westlake.tkg.com (bulk_mailer v1.12); Fri, 31 Aug 2001
06:08:46
-0500
Received: (from mjrdomo@localhost)by westlake.tkg.com (8.9.3/8.9.3) id
GAA166488for nv-l-outgoing; Fri, 31 Aug 2001 06:08:45 -0500
>From owner-nv-l AT tkg DOT com Fri, 31 Aug 2001 04:18:02 -0700
Message-ID: <3B8F6FAB.41BB2516 AT skills-1st.co DOT uk>
X-Mailer: Mozilla 4.77 [en] (WinNT; U)
X-Accept-Language: en
References: <F2196mlB5RRTEuHeqpv0000231c AT hotmail DOT com>
Sender: owner-nv-l AT tkg DOT com
Precedence: bulk

The Release Notes for NetView 6.0.1 and 6.0.2 document how to import
LOTS of Cisco trap definitions.  Basically, they are all shipped in
/usr/OV/newconfig/OVSNMP_RUN/trapd.conf.  Back up your live trapd.conf
and then run the nvaddtrapdconf utility to merge your existing trap
customisation with the Cisco stuff.

Cheers, Jane

--
Tivoli Certified Enterprise Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2001 Jane Curry <jane.curry AT skills-1st.co DOT uk>.  All rights
reserved.


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


<Prev in Thread] Current Thread [Next in Thread>