I don't know why the status is not showing correctly. If you ping it
does it come green? That would be a false alarm,  adjusted
by tuning the timeouts. Tell us all more about it, and someone
will probably have a suggestion.  You might try reposting the
append you found, if you think it is the same problem.

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit



                                                                                
          
                    "Rick Yetter                                                
          
                    II"                  To:     Leslie 
Clark/Southfield/IBM@IBMUS        
                    <ryetter_ii@ho       cc:                                    
          
                    tmail.com>           Subject:     Re: Netview 6             
          
                                                                                
          
                    08/28/01 06:20                                              
          
                    PM                                                          
          
                                                                                
          
                                                                                
          



Thank you for the quick response, I wrote directly to you because I was
going through a thread on the list service with my exact problem, but there
was no resolution to it.  It was a thread titled "Cisco Links."  The
platform I am on is AIX 4.3.3 and Netview 6.0.2.  The serial interfaces are
numbered and we are not using the circuitless IP feature.  All ifType are
the same (Point to Point Serial (22).
----- Original Message -----
From: "Leslie Clark" <lclark AT us.ibm DOT com>
To: <NV-L AT tkg DOT com>
Cc: <ryetter_ii AT hotmail DOT com>
Sent: Tuesday, August 28, 2001 3:13 PM
Subject: Re: Netview 6


> Rick, if you don't subscribe to the public listserver for Neview, you
> ought to sign up. Find out more about it at www.tkg.com/nv-l.  It is
> more helpful to everyone to participate in these discussions
> there as opposed to one-on-one.
>
> Now, what platform are you on, and what version? And are
> your point-to-point serials numbered, or unnumbered? Are you
> using that circuitless IP feature of Bay devices?
>
>
> Cordially,
>
> Leslie A. Clark
> IBM Global Services - Systems Mgmt & Networking
> Detroit
>
>
>
>
>                     "Rick Yetter
>                     II"                  To:     Leslie
Clark/Southfield/IBM@IBMUS
>                     <ryetter_ii@ho       cc:
>                     tmail.com>           Subject:     Netview 6
>
>                     08/28/01 03:20
>                     PM
>
>
>
>
>
> Leslie,
>
> I have a question about netview that hopefully you can help me with.  I'm
> monitoring all Bay networks network and on the routers that have a point
to
> point serial interface, the icon on the map is Red and the status of the
> device shows down from a netview standpoint.  The device is actually
> working properly.  Is there any way I can get netview to show the correct
> status?
>
> TIA,
>
> Rick Yetter II
>
>
>