Re: Change Symbol Type Problem
2001-08-22 13:58:28
This is a multipart message in MIME format. NetView (netmon) is doing a "Configuration Check" which it does daily by
default and this is returning the symbol back to it's original, probably
based on the "oid_to_sym" file. One way of preventing this is to set a map
option from the GUI as follows:
File->Describe Map...
Choose "IP Map" to be configured and click the button "Configure For This
Map..."
Set the last option, "Should IP Map override user symbol customization" to
False.
Hope this helps,
Gareth Holl
Software Engineer
gholl AT us.ibm DOT com
Tivoli Systems / IBM Corporation
Research Triangle Park, North Carolina.
"Enriquez Bolio,C-Raul,MEXICO,INFO" <C-Raul.Enriquez AT mx.nestle DOT com>
Sent by: owner-nv-l AT tkg DOT com
08/22/2001 01:20 PM
Please respond to IBM NetView Discussion
To: "'Netview List'" <nv-l AT tkg DOT com>
cc:
Subject: [NV-L] Change Symbol Type Problem
Hello List:
I have a problem for changing symbol types in my netview submaps. I don´t
have any problem for changing the symbol, it works OK, but after a period
of
time, Netview automatically returns to the original one (for example I
change from IP Network symbol to Site and Netview returns it to IP
Network).
I have selected Automatic layout off in the submaps and still have the
problem.
I'm running Netview 6.0.2, AIX 4.3.3
Thanks. Saludos.
Carlos Enriquez
Systems Analyst
IS/Technical Support
Nestle Mexico S.A. de C.V.
Phone: (52)5262-5546
email: c-raul.enriquez AT mx.nestle DOT com
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
NetView (netmon) is doing a "Configuration Check" which it does daily by default and this is returning the symbol back to it's original, probably based on the "oid_to_sym" file. One way of preventing this is to set a map option from the GUI as follows:
File->Describe Map...
Choose "IP Map" to be configured and click the button "Configure For This Map..."
Set the last option, "Should IP Map override user symbol customization" to False.
Hope this helps,
Gareth Holl
Software Engineer
gholl AT us.ibm DOT com
Tivoli Systems / IBM Corporation
Research Triangle Park, North Carolina.
| "Enriquez Bolio,C-Raul,MEXICO,INFO" <C-Raul.Enriquez AT mx.nestle DOT com>
Sent by: owner-nv-l AT tkg DOT com
08/22/2001 01:20 PM
Please respond to IBM NetView Discussion
|
To: "'Netview List'" <nv-l AT tkg DOT com>
cc:
Subject: [NV-L] Change Symbol Type Problem
|
Hello List:
I have a problem for changing symbol types in my netview submaps. I don´t
have any problem for changing the symbol, it works OK, but after a period of
time, Netview automatically returns to the original one (for example I
change from IP Network symbol to Site and Netview returns it to IP Network).
I have selected Automatic layout off in the submaps and still have the
problem.
I'm running Netview 6.0.2, AIX 4.3.3
Thanks. Saludos.
Carlos Enriquez
Systems Analyst
IS/Technical Support
Nestle Mexico S.A. de C.V.
Phone: (52)5262-5546
email: c-raul.enriquez AT mx.nestle DOT com
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|
|
|