Yes i can see the data if i do NOT specify the interface but in that case
it shows 4 as the interface no. for all four PVCs(4.77, 4.90 4.100 and
4.600). So it is not possible to identify which value corresponds to which
PVC
With Best Regards
Ajay Sachdeva
"Leslie Clark" <lclark AT us.ibm DOT com> on 08/01/2001 10:29:49 PM
Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>
To: IBM NetView Discussion <nv-l AT tkg DOT com>
cc: (bcc: Ajay Sachdeva/India/IBM)
Subject: Re: [NV-L] frame relay frCircuitstate data collection
There were a number of fixes related to snmp data collection and viewing
in 6.0.2 on NT, so you should get that on soon. Joe, have you seen this
work?
Also, Ajay, can you get the data if you do NOT specify the interface? That
is,
can you use some other criteria, like all of the data for a node?
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
Ajay Sachdeva/India/IBM@IBMIN AT tkg DOT com on 08/01/2001 10:04:36 AM
Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>
Sent by: owner-nv-l AT tkg DOT com
To: IBM NetView Discussion <nv-l AT tkg DOT com>
cc:
Subject: Re: [NV-L] frame relay frCircuitstate data collection
Hi Joe,
I have the same configuration as you stated, Data is being stored in flat
file and ODBC database. you are very true that in flat file it stores the
data and i can see these files named frCircuitstate.4.77,
frCircuitstate4.90 etc..... in /usr/ov/databases/snmpcollect directory .
But the only problem is how to view the data collected in these files. I
have tried using both GUI and SNMPODUMP command but when I give instance
no. as 4.90 or 4.77 it says please enter integer value for instance no.
If you know the right process to view this collected data in flat file,
please do let me know.
Look forward to hear from you
Thanks a lot
With Best Regards
Ajay Sachdeva
Joe Fernandez <jfernand AT kardinia DOT com> on 08/01/2001 07:02:53 PM
Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>
To: IBM NetView Discussion <nv-l AT tkg DOT com>
cc: (bcc: Ajay Sachdeva/India/IBM)
Subject: Re: [NV-L] frame relay frCircuitstate data collection
Hi Ajay,
On NT, I believe the DB schema for the Microsoft Access storage does not
support compound indices, as used in Frame Relay DLCIs e.g. 4.77, 4.90
However, the flat file storage supports this.
So set up your snmpcollect daemon to store data in both the internal flat
files and the ODBC data base. It takes only a few clicks on the server set
up to do this.
You should then be able to see collected data by PVC: 4.77, 4.90 etc
At 07:08 PM 31-07-01 +0530, you wrote:
>Joe,
>It is NV 6.0.1 on NT 4.0/SP6......
>Regds.......Ajay
>
>
>
>Joe Fernandez <jfernand AT kardinia DOT com> on 07/31/2001 06:54:24 PM
>
>Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>
>
>To: IBM NetView Discussion <nv-l AT tkg DOT com>
>cc: (bcc: Ajay Sachdeva/India/IBM)
>Subject: Re: [NV-L] frame relay frCircuitstate data collection
>
>
>
>
>Hi,
>What OS are you running and what version of NetView?
>
>At 12:14 PM 26-07-01 +0530, you wrote:
>>HI All,
>>I have got no reply on my previous query posted on 24th july, Request you
>>all to please help me on this. Please let me know If some further info is
>>required on this. This data collection is used for making FR Circuit UP
>>time report. Is there any other way to know Fr Circuit UP time?
>>
>>Query which was raised is attached below for the reference.
>>
>>Look forward to hear this time. Thanking you all in advance.
>>
>>With Best Regards
>>
>>Ajay Sachdeva
>>IBM Global Services India Pvt. Ltd.,
>>E- Mail : asachdev AT in.ibm DOT com
>>
>>
>>
>>Ajay Sachdeva
>>07/24/2001 08:35 PM
>>
>>To: IBM NetView Discussion <nv-l AT tkg DOT com>
>>cc:
>>From: Ajay Sachdeva/India/IBM@IBMIN
>>Subject: [NV-L] frame relay frCircuitstate data collection (Document
>> link: Ajay Sachdeva)
>>
>>Hi all,
>>we are collecting the data for frCircuitstate MIB variable which gives
>>Virtual circuits status as active or inactive. We have four virtual
>>circuits which are configured as four sub- interfaces on the router . Now
>>when we use MIB browser to see frCircuitstate values it shows
>>Instance Value
>>4.77 active
>>4.90 active
>>4.100 active
>>4.600 active
>>
>>which is perfectly OK
>>
>>But when we try to see the collected data using collect data option we
see
>>only 4 as instance number for all four circuits. Ideally it should show
>>instance number as 4.77, 4.90,4.100 and 4.600 so that we can identify
that
>>for which circuit this value corresponds to.
>>
>>Seek for your kind help on this. Thanking you all in advance.
>>
>>With Best Regards
>>
>>Ajay Sachdeva
>>IBM Global Services India Pvt. Ltd.,
>>E- Mail : asachdev AT in.ibm DOT com
>>
>>
>>
>>
>>_________________________________________________________________________
>>NV-L List information and Archives: http://www.tkg.com/nv-l
>>
>Joe Fernandez
>Kardinia Software
>jfernand AT kardinia DOT com
>
>http://www.kardinia.com
>
>_________________________________________________________________________
>NV-L List information and Archives: http://www.tkg.com/nv-l
>
>
>
>_________________________________________________________________________
>NV-L List information and Archives: http://www.tkg.com/nv-l
>
Joe Fernandez
Kardinia Software
jfernand AT kardinia DOT com
http://www.kardinia.com
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|
