nv-l

Re: frame relay frCircuitstate data collection

2001-07-26 02:44:52
Subject: Re: frame relay frCircuitstate data collection
From: asachdev AT in.ibm DOT com
To: nv-l AT lists.tivoli DOT com
Date: Thu, 26 Jul 2001 12:14:52 +0530
HI All,
I have got no reply on my previous query posted on 24th july, Request you
all to please help me on this. Please let me know If some further info is
required on this. This data collection is used for making FR Circuit UP
time report.  Is there any other way to know  Fr Circuit UP time?

Query which was raised is attached below for the reference.

Look forward to hear this time. Thanking you all in advance.

With Best Regards

Ajay Sachdeva
IBM Global Services India Pvt. Ltd.,
E- Mail : asachdev AT in.ibm DOT com



Ajay Sachdeva
07/24/2001 08:35 PM

To:   IBM NetView Discussion <nv-l AT tkg DOT com>
cc:
From: Ajay Sachdeva/India/[email protected]
Subject:  [NV-L] frame relay frCircuitstate data collection  (Document
      link: Ajay Sachdeva)

Hi all,
we are collecting the data for frCircuitstate MIB variable which gives
Virtual circuits status as active or inactive. We have four virtual
circuits which are configured as four sub- interfaces on the router . Now
when we use MIB browser to see frCircuitstate values it shows
Instance  Value
4.77      active
4.90      active
4.100          active
4.600          active

which is perfectly OK

But when we try to see the collected data using collect data option we see
only 4 as instance number for all four circuits. Ideally it should show
instance number as 4.77, 4.90,4.100 and 4.600 so that we can identify that
for which circuit this value corresponds to.

Seek for your kind help on this. Thanking you all in advance.

With Best Regards

Ajay Sachdeva
IBM Global Services India Pvt. Ltd.,
E- Mail : asachdev AT in.ibm DOT com