nv-l

Antwort: RE: Color not propagating to submap

2001-07-19 05:46:36
Subject: Antwort: RE: Color not propagating to submap
From: sylvia.koch AT emprise DOT de
To: nv-l AT lists.tivoli DOT com
Date: Thu, 19 Jul 2001 11:46:36 +0200
Hi Jack,

check the status source of these router symbols:   Context menu ==> Edit
==> Modify/Describe ==> Symbols
I assume, that in your case it is "Symbol" instead of "Compound". If you
switch to Compound, then the status of each interface should be propagated
to the status of the router symbol.
Hope this helps

Sylvia Koch
Tivoli Certified Network Management Consultant & Instructor



                                                                                
            
                    "Chan, Jack"                                                
            
                    <[email protected]        An:     "'IBM NetView Discussion'"   
            
                    nisys.com>             <nv-l AT tkg DOT com>                
                   
                    Gesendet von:          Kopie:  "Boulieris, Arthur"          
            
                    [email protected]        <Arthur.Boulieris AT nz.unisys DOT 
com>, (Blindkopie:   
                    com                    Sylvia Koch/Emprise)                 
            
                                           Thema:  RE: [NV-L] Color not 
propagating to      
                                           submap                               
            
                    19.07.01 07:41                                              
            
                    Bitte antworten                                             
            
                    an IBM NetView                                              
            
                    Discussion                                                  
            
                                                                                
            
                                                                                
            




Hi Leslie,

Before the Netview upgrade to 6.02, we had 5.1, and colors of the copy and
pasted maps were propagating through. And 6.02 doesn't (e.g. router
interfaces - one red, one green, but router is GREEN, which was yellow
before the upgrade).

Please let me explain why we are using copy and pasted maps. It is because
we separates logical geographical branches for each clients. So we have a
generic object for each client, and under that, we have IP submaps of the
branch offices. So we did not use Smartsets.

Do you think it will help it I turn the router fault isolation off?
How else can I solve this color problem? It is affecting the daily
operation
people, because they look at the map with all the customer's generic
object.

Sorry for being a pain, thanks a lot for your help.

Jack Chan.
New Zealand, Enterprise System Management.


-----Original Message-----
From: Leslie Clark [mailto:lclark AT us.ibm DOT com]
Sent: Wednesday, 18 July 2001 4:16 a.m.
To: IBM NetView Discussion
Subject: Re: [NV-L] Color not propagating to submap


You should not be copying and pasting. That menu option is only there
to mislead you. Use Cut & Paste to organize the map. If you need an
extra copy somewhere for a different view, use the Smartsets.

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit


"Chan, Jack" <jack.chan AT nz.unisys DOT com>@tkg.com on 07/17/2001 12:28:13 AM

Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>

Sent by:  owner-nv-l AT tkg DOT com


To:   "'IBM NetView Discussion'" <nv-l AT tkg DOT com>
cc:
Subject:  [NV-L] Color not propagating to submap



Hi List,

I have Netview 6.02 on solaris 2.6, upgraded from 5.1

When there is a router down, it shows white (normal). Under the IP Internet
map, the router and all the nodes hanging of it shows white (normal). So we
avoided a lot of node down pages.

BUT.....in my copy and pasted submaps, some IP Network and switches are not
white (either yellow or green).

In essence, one thing shows white on IP Internet map and yellow/green in
other submaps. It seems like the color is not propagating through to some
submaps.

Has anyone encountered this before? What should I do?

Thanks in advance,

Jack Chan
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


<Prev in Thread] Current Thread [Next in Thread>
  • Antwort: RE: Color not propagating to submap, sylvia . koch <=