RE: Cisco Symbols

2001-07-18 11:42:19
Subject: RE: Cisco Symbols
From: "Caputo, Thomas" <TCaputo AT kmart DOT com>
To: nv-l AT lists.tivoli DOT com
Date: Wed, 18 Jul 2001 11:42:19 -0400
Yup, won't get too far unless you get the whole /usr/OV/conf on down.
In regards to oid_to_sym, and oid_to_type:
Wouldn't their location be /usr/OV/conf/C and /usr/OV/conf, respectively?

-----Original Message-----
From: Leslie Clark [mailto:lclark AT us.ibm DOT com]
Sent: Wednesday, July 18, 2001 11:14 AM
To: IBM NetView Discussion
Subject: Re: [NV-L] Cisco Symbols

You will also need to transfer the oid_to_sym and oid_to_type files.


Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking

07/18/2001 09:49:32 AM

Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>

Sent by:  owner-nv-l AT tkg DOT com

To:   <nv-l AT tkg DOT com>
Subject:  [NV-L] Cisco Symbols

Hello To All,

I have two netview systems: Production| Netview 6.0, Framework 3.6.2, Aix
4.3.2 (used to have CW2000)

Backup: Netview 6.0.2, Framework 3.7.1, AIX (NO CW2k)

I transferred he /usr/OV/databases, /usr/OV/bitmaps, /usr/OV/symbols/
usr/OV/fields from Production to Backup.

When I first opened the map all the cisco symbols and labels were identical
to the Production box.
I added and deleted a few nodes from the seed file and the topology map-on
the backup box.i did a ovtopofix -a, and  a netmon -y. Now when I open the
default map the cisco routers have the default symbols (crossing arrows)
instead  of the 6500 (etc) symbol.

I did :
ovstop netmon
ovmapcount -a
ovtopofix -a
ovstop ovtopmd
ovtopofix -Cv
ovstart -v -d
ovw -config
ovw -fields
ovw -verify

I read the archive for this group and found quite a bit of information. but
they were for V5.0. Has anything changed. Should I add/transfer
/usr/OV/conf/C/symbols directory as well?

Can anyone shed some light into this?




<Prev in Thread] Current Thread [Next in Thread>