This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
Thanks for the response. I like to know where i am doing mistake in
rulesets. My query is as follows.
1. I need to control on "Down" and "UP" trap msgs. Like agent is sending
"Down" trap and "up" trap every minute and correspondingly i am getting mail
also. instead of that for 5 "Down" and "up" msgs in 10 mts time i should get
one "Down" msg and coreesponding "Up" msg. So how do i do it?
I am not sure where i am making mistake on this rule.? could you pls help?
Thanks,
Santosh
> ----------
> From: James_Shanks AT TIVOLI DOT COM[SMTP:James_Shanks AT TIVOLI DOT
> COM]
> Reply To: IBM NetView Discussion
> Sent: Tuesday, April 17, 2001 6:15 PM
> To: IBM NetView Discussion
> Subject: RE: [NV-L] Ruleset COnfiguration for Mail Alert
>
> <<File: mail.rs>>
>
>
> You are using "echo" here which will not work because the daemon,
> actionsvr, who executed your action does not have a display. If you look
> at the nvaction.alog and blog where such errors would be written then you
> will undoubtedly some error messages there. You need to use a utility
> such
> as ovxecho, which will pop a window up on a display, that is not owned by
> the process running the command.
> There is documentation on using ovxecho, including a man page and examples
> in the book. You need to specify the display you want the window to be
> put
> up on, either by setting the DISPLAY environment variable in a script
> which
> calls ovxecho or by using the -d operand
> /usr/OV/bin/ovxecho -d mybox.mydomain:0.0 <message text>
>
> James Shanks
> Team Leader, Level 3 Support
> Tivoli NetView for UNIX and NT
>
>
>
> z_esm_karekars <z_esm_karekars AT bharatpetroleum DOT com>@tkg.com on
> 04/17/2001
> 06:45:58 AM
>
> Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>
>
> Sent by: owner-nv-l AT tkg DOT com
>
>
> To: "'IBM NetView Discussion'" <nv-l AT tkg DOT com>
> cc:
> Subject: RE: [NV-L] Ruleset COnfiguration for Mail Alert
>
>
>
>
>
> Hi Helen,
>
> I am trying following rulesets for generating mail for 5 Cisco UP & Down
> Link traps in 10 min. I could not get it work properly. Can U pls check it
> and reply me back.
>
> <<mail.rs>>
> Regards,
> Santosh
>
> ----------
> From: Helen Cloostermans[SMTP:Helen.Cloostermans AT dexia DOT be]
> Reply To: IBM NetView Discussion
> Sent: Tuesday, April 17, 2001 2:20 PM
> To: nv-l
> Subject: [NV-L] Ruleset COnfiguration for Mail Alert
>
> Santosh,
>
> $A,, $2 and $4 in traps are $NVA, $NVATTR_2 and $NVATTR_4 in rulesets.
>
> Regards,
> Helen
>
> ---------------------- Forwarded by Helen Cloostermans/GKBCCB on
> 17/04/2001 10:49 ---------------------------
>
> z_esm_karekars%bharatpetroleum.com@Internet
> 17/04/2001 10:25
> To: nv-l%tkg.com@Internet
> cc: (bcc: Helen Cloostermans/GKBCCB)
>
> Subject: [NV-L] Ruleset COnfiguration for Mail Alert
>
> Hi,
>
> Having NV 6.0.1 on AIX 4.3.3
> We are trying to configure ruleset to generate the mail alert for Cisco
> traps.
> What type of NV Attributes I should use to get the Node Name, Interface
> Description, & Event Occured. I can get the same through
> trapcustomization
> if I use $A for Node name, $2 for Interface Description, & $4 for the
> event
> type.
> Can U pls update me on this
>
> Regards,
> Santosh
>
>
> (See attached file: mail.rs)
>
>
Thanks for the response. I like to know where i am doing mistake in rulesets. My query is as follows.
1. I need to control on "Down" and "UP" trap msgs. Like agent is sending "Down" trap and "up" trap every minute and correspondingly i am getting mail also. instead of that for 5 "Down" and "up" msgs in 10 mts time i should get one "Down" msg and coreesponding "Up" msg. So how do i do it?
I am not sure where i am making mistake on this rule.? could you pls help?
Thanks,
Santosh
----------
From: James_Shanks AT TIVOLI DOT COM[SMTP:James_Shanks AT TIVOLI DOT COM]
Reply To: IBM NetView Discussion
Sent: Tuesday, April 17, 2001 6:15 PM
To: IBM NetView Discussion
Subject: RE: [NV-L] Ruleset COnfiguration for Mail Alert
<<File: mail.rs>>
You are using "echo" here which will not work because the daemon,
actionsvr, who executed your action does not have a display. If you look
at the nvaction.alog and blog where such errors would be written then you
will undoubtedly some error messages there. You need to use a utility such
as ovxecho, which will pop a window up on a display, that is not owned by
the process running the command.
There is documentation on using ovxecho, including a man page and examples
in the book. You need to specify the display you want the window to be put
up on, either by setting the DISPLAY environment variable in a script which
calls ovxecho or by using the -d operand
/usr/OV/bin/ovxecho -d mybox.mydomain:0.0 <message text>
James Shanks
Team Leader, Level 3 Support
Tivoli NetView for UNIX and NT
z_esm_karekars <z_esm_karekars AT bharatpetroleum DOT com>@tkg.com on 04/17/2001
06:45:58 AM
Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>
Sent by: owner-nv-l AT tkg DOT com
To: "'IBM NetView Discussion'" <nv-l AT tkg DOT com>
cc:
Subject: RE: [NV-L] Ruleset COnfiguration for Mail Alert
Hi Helen,
I am trying following rulesets for generating mail for 5 Cisco UP & Down
Link traps in 10 min. I could not get it work properly. Can U pls check it
and reply me back.
<<mail.rs>>
Regards,
Santosh
----------
From: Helen Cloostermans[SMTP:Helen.Cloostermans AT dexia DOT be]
Reply To: IBM NetView Discussion
Sent: Tuesday, April 17, 2001 2:20 PM
To: nv-l
Subject: [NV-L] Ruleset COnfiguration for Mail Alert
Santosh,
$A,, $2 and $4 in traps are $NVA, $NVATTR_2 and $NVATTR_4 in rulesets.
Regards,
Helen
---------------------- Forwarded by Helen Cloostermans/GKBCCB on
17/04/2001 10:49 ---------------------------
z_esm_karekars%bharatpetroleum.com@Internet
17/04/2001 10:25
To: nv-l%tkg.com@Internet
cc: (bcc: Helen Cloostermans/GKBCCB)
Subject: [NV-L] Ruleset COnfiguration for Mail Alert
Hi,
Having NV 6.0.1 on AIX 4.3.3
We are trying to configure ruleset to generate the mail alert for Cisco
traps.
What type of NV Attributes I should use to get the Node Name, Interface
Description, & Event Occured. I can get the same through
trapcustomization
if I use $A for Node name, $2 for Interface Description, & $4 for the
event
type.
Can U pls update me on this
Regards,
Santosh
(See attached file: mail.rs)
|