nv-l

Re: Can't discovery subnet with VPN device

2001-03-08 12:52:33
Subject: Re: Can't discovery subnet with VPN device
From: Terry_E_Simpson AT tivoli DOT com
To: nv-l AT lists.tivoli DOT com
Date: Thu, 8 Mar 2001 12:52:33 -0500
Hi Leslie,
Thanks for the response.  I tried what you suggested below with no success.
When I looked into the nv.log, it states "the subnet mask cannot be read
from the registery".  Do you know what this pertains to? Could this mean I
need to install the latest Windows NT 4.0 service pack (6a)?




"Leslie Clark" <lclark AT US.IBM DOT COM>@tkg.com on 03/06/2001 11:42:46 PM

Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>

Sent by:  owner-nv-l AT tkg DOT com


To:   IBM NetView Discussion <nv-l AT tkg DOT com>
cc:
Subject:  Re: [NV-L] Can't discovery subnet with VPN device


Terry, if you have it in the seedfile, you might try
ovstop netmon
ovtopofix -a
ovstart
That usually does it for me. And of course make sure there
is nothing in your seedfile that would exclude it.

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
(248) 552-4968 Voicemail, Fax, Pager


Terry_E_Simpson AT TIVOLI DOT [email protected] on 03/06/2001 07:36:48 PM

Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>

Sent by:  owner-nv-l AT tkg DOT com


To:   IBM NetView Discussion <nv-l AT tkg DOT com>
cc:
Subject:  [NV-L] Can't discovery subnet with VPN device



I'm running NetView for NT 6.0.1 on a Windows NT 4.0 box.   NetView
discovers the local subnet and the router that connects to the adjacent
subnet.  I have a VPN (gate) device on the adjacent subnet, but NetView
does not discover it.  I put the IP addr of the device in the seed file and
included it in the /etc/host file (DNS is enable, but entries in the  host
file should bypass DNS, right?).  Then re-discovered the network, the VPN
device still does not show up on the topology map.  I ran the "ovobjprint
-s Interface: <ipaddr of VPN device>" command to see if maybe netmon had
discovered any info associated with this device.  Unfortunately,  there was
no associated data in the object database.  Any ideas on what could be
happening here?  I can ping the device, but attempts to demand poll
timesout.   Any suggestions?

Terry Simpson
Tivoli Sr. Systems Engineer

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l


<Prev in Thread] Current Thread [Next in Thread>