This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
James,
Back to the original problem I was experiencing while adding new nodes.....
After an nvload of an object, trapd records that it has been added, etc. The
obobjprint -s shows that it's in the database, however no mention of which
map it is in....The objects do not show up on the default map (I used the
locate command), nor on any other map....It has been suggested that
nvTurboDatabase command has been used to solve similar problems, but I'm
wary of using that command. Could this be a database size problem,
limitations in the number of nodes the map can display?? Any suggestions at
this point?
Thanks,
Mike
-----Original Message-----
From: James_Shanks AT tivoli DOT com [mailto:James_Shanks AT tivoli DOT com]
Sent: Wednesday, February 21, 2001 11:10 AM
To: IBM NetView Discussion
Subject: RE: [NV-L] New object additions
I'll be you are being misled by what output says. If you have only one
map, then the name of that map is "default", unless you chae nge. Most
people don't because if you do then you have to specify what map name to
start with, or else NetView will create a new map and name it "default" as
well.
When you do ovobjprint -s <selection name> typically the last thing that
you see is an item which reads
<map name> IP Symbol List
If you have only one map then it reads
"default IP Symbol List"
When you have Map Exists and Maps Managed set to 1 then this device is on a
map somewhere, and the IP Symbol List tells you what map it is in (though
not which submap). To find it you have t bring up the GUI with that map
and do a Locate.
James Shanks
Team Leader, Level 3 Support
Tivoli NetView for UNIX and NT
Stephen Elliott <selliott AT epicrealm DOT com>@tkg.com on 02/21/2001 09:32:04
AM
Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>
Sent by: owner-nv-l AT tkg DOT com
To: "'IBM NetView Discussion'" <nv-l AT tkg DOT com>
cc:
Subject: RE: [NV-L] New object additions
James,
Regarding ovobjprint showing what maps an object is in, I can't duplicate
that feature. The -s option with a node name or a -o with the object ID
show
me all the fields. I see OVW Maps Exists and OVW Maps Managed fields (both
set to 1) but nowhere in the list do I see a map name. ovtopodump doesn't
show this, either.
NV 6.0.1 on Solaris 2.6.
Regards,
Steve Elliott
Sr. Network Mgmt. Engineer
epicRealm, Inc.
-----Original Message-----
From: James_Shanks AT tivoli DOT com [mailto:James_Shanks AT tivoli DOT com]
Sent: Tuesday, February 20, 2001 1:19 PM
To: IBM NetView Discussion
Subject: Re: [NV-L] New object additions
Are you on a read-write map? If not, do a refresh. If so ...
Try looking for it. Do Locate using the object name in the trap. If it
is not found, try ovobjprint -s <selection name> and see what you get. It
should tell you what maps it appears in (either "default" or some other
name). You found it in the database but it is still not there? ipmap
batches things and does his updates every couple of minutes so as not to
always have te GUI say "synchronizing". It may seem slow if you are
hovering there waiting for it. You could try forcing it by taking down the
GUI and restarting it.
James Shanks
Team Leader, Level 3 Support
Tivoli NetView for UNIX and NT
"Menefee, Mike" <MMenefee AT neteffectcorp DOT com>@tkg.com on 02/20/2001
01:50:05
PM
Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>
Sent by: owner-nv-l AT tkg DOT com
To: NV-L AT tkg DOT com
cc:
Subject: [NV-L] New object additions
running nv 6.0.1 on AIX 4.3.....
Just ran into a problem where a freshly added node has not appeared in the
New Object Holding area, or anywhere else on the map for that matter...the
trapd.log records it's addition, and the Events window is recieving traps
for it....any ideas where this may be or why it's not on the map?
Thanks,
MM
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
James,
Back to the original problem I was experiencing while adding new nodes.....
After an nvload of an object, trapd records that it has been added, etc. The obobjprint -s shows that it's in the database, however no mention of which map it is in....The objects do not show up on the default map (I used the locate command), nor on any other map....It has been suggested that nvTurboDatabase command has been used to solve similar problems, but I'm wary of using that command. Could this be a database size problem, limitations in the number of nodes the map can display?? Any suggestions at this point?
Thanks,
Mike
-----Original Message-----
From: James_Shanks AT tivoli DOT com [mailto:James_Shanks AT tivoli DOT com]
Sent: Wednesday, February 21, 2001 11:10 AM
To: IBM NetView Discussion
Subject: RE: [NV-L] New object additions
I'll be you are being misled by what output says. If you have only one
map, then the name of that map is "default", unless you chae nge. Most
people don't because if you do then you have to specify what map name to
start with, or else NetView will create a new map and name it "default" as
well.
When you do ovobjprint -s <selection name> typically the last thing that
you see is an item which reads
<map name> IP Symbol List
If you have only one map then it reads
"default IP Symbol List"
When you have Map Exists and Maps Managed set to 1 then this device is on a
map somewhere, and the IP Symbol List tells you what map it is in (though
not which submap). To find it you have t bring up the GUI with that map
and do a Locate.
James Shanks
Team Leader, Level 3 Support
Tivoli NetView for UNIX and NT
Stephen Elliott <selliott AT epicrealm DOT com>@tkg.com on 02/21/2001 09:32:04 AM
Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>
Sent by: owner-nv-l AT tkg DOT com
To: "'IBM NetView Discussion'" <nv-l AT tkg DOT com>
cc:
Subject: RE: [NV-L] New object additions
James,
Regarding ovobjprint showing what maps an object is in, I can't duplicate
that feature. The -s option with a node name or a -o with the object ID
show
me all the fields. I see OVW Maps Exists and OVW Maps Managed fields (both
set to 1) but nowhere in the list do I see a map name. ovtopodump doesn't
show this, either.
NV 6.0.1 on Solaris 2.6.
Regards,
Steve Elliott
Sr. Network Mgmt. Engineer
epicRealm, Inc.
-----Original Message-----
From: James_Shanks AT tivoli DOT com [mailto:James_Shanks AT tivoli DOT com]
Sent: Tuesday, February 20, 2001 1:19 PM
To: IBM NetView Discussion
Subject: Re: [NV-L] New object additions
Are you on a read-write map? If not, do a refresh. If so ...
Try looking for it. Do Locate using the object name in the trap. If it
is not found, try ovobjprint -s <selection name> and see what you get. It
should tell you what maps it appears in (either "default" or some other
name). You found it in the database but it is still not there? ipmap
batches things and does his updates every couple of minutes so as not to
always have te GUI say "synchronizing". It may seem slow if you are
hovering there waiting for it. You could try forcing it by taking down the
GUI and restarting it.
James Shanks
Team Leader, Level 3 Support
Tivoli NetView for UNIX and NT
"Menefee, Mike" <MMenefee AT neteffectcorp DOT com>@tkg.com on 02/20/2001 01:50:05
PM
Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>
Sent by: owner-nv-l AT tkg DOT com
To: NV-L AT tkg DOT com
cc:
Subject: [NV-L] New object additions
running nv 6.0.1 on AIX 4.3.....
Just ran into a problem where a freshly added node has not appeared in the
New Object Holding area, or anywhere else on the map for that matter...the
trapd.log records it's addition, and the Events window is recieving traps
for it....any ideas where this may be or why it's not on the map?
Thanks,
MM
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
| 