This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
Hi Netviewers,
Complusory information:
NetView 6.0.1
Framework 3.6.2
Solaris 2.6
Over the weekend we had a server fail and it was reported as Router Marginal
(Warning) rather than a Node Down (Major). The servers has 2 interfaces but no
routing loaded. The interface that failed was the Production network whilst the
Backups network stayed up.
The ovobjprint shows:
FIELD ID FIELD NAME FIELD VALUE
10 Selection Name "fmddev1"
....
71 IP Status Normal(2)
74 isIPRouter FALSE
101 vendor Sun(39)
111 isNode TRUE
...
115 isBridge FALSE
116 isRouter FALSE
117 isHub FALSE
120 isWorkstation TRUE
135 isIP TRUE
...
156 SNMP sysObjectID "1.3.6.1.4.1.42.2.1.1"
...
171 TopM Interface Count 2
177 TopM Interface List "hme0 Up
10.123.0.14 255.255.0.0 0x0800209B56EB ethernet csmacd "
"hme1 Up
10.126.0.14 255.255.0.0 0x0800209B56EB ethernet csmacd "
Why has Netview reported a Node as a router when isRouter = FALSE?
How do we set Netview so that when the Production interfaces fails the Major
alarm is raised, not managing the Backups interface is being considered.
Thanks
Graeme Nelson
Macquarie Bank Ltd
Sydney, Australia
Hi Netviewers,
Complusory information:
NetView 6.0.1
Framework 3.6.2
Solaris 2.6
Over the weekend we had a server fail and it was reported as Router Marginal (Warning) rather than a Node Down (Major). The servers has 2 interfaces but no routing loaded. The interface that failed was the Production network whilst the Backups network stayed up.
The ovobjprint shows:
FIELD ID FIELD NAME FIELD VALUE
10 Selection Name "fmddev1"
....
71 IP Status Normal(2)
74 isIPRouter FALSE
101 vendor Sun(39)
111 isNode TRUE
...
115 isBridge FALSE
116 isRouter FALSE
117 isHub FALSE
120 isWorkstation TRUE
135 isIP TRUE
...
156 SNMP sysObjectID "1.3.6.1.4.1.42.2.1.1"
...
171 TopM Interface Count 2
177 TopM Interface List "hme0 Up 10.123.0.14 255.255.0.0 0x0800209B56EB ethernet csmacd "
"hme1 Up 10.126.0.14 255.255.0.0 0x0800209B56EB ethernet csmacd "
Why has Netview reported a Node as a router when isRouter = FALSE?
How do we set Netview so that when the Production interfaces fails the Major alarm is raised, not managing the Backups interface is being considered.
Thanks
Graeme Nelson
Macquarie Bank Ltd
Sydney, Australia
|