It is queue size not number of threads on Unix.
>From netmon man page:
-q number
Sets the queue size for ICMP pings. The value you specify with this
switch can degrade system performance and response time; therefore,
using Server Setup to regulate netmon behaviour is recommended.
regards,
Peter Anderson
Senior Communications Analyst
Westpac Banking Corporation
Any views or opinions presented are solely those of the author and do
not necessarily represent those of Westpac Banking Corporation.
-----Original Message-----
From: Boyles, Gary P
Sent: Wednesday, 10 January 2001 23:24
To: 'IBM NetView Discussion'
Cc:
Subject: RE: [NV-L] netmon question
Sarah,
Maybe I mis-spoke (of you're on UNIX).
On NetView NT there is the -q options (to specify the number of
ping-threads),
and -Q to specify the number of SNMP threads.
Sarah,
Maybe I spoke to soon...
I don't know if netmon supports this on UNIX. It is on NetView NT.
Do a netmon -h (or netmon -?) and see if it is listed.
It was on NV NT.
If so... modify your /usr/OV/lrf/netmon.lrf file and restart netmon.
Maybe someone from 3rd-level support can chime in here.
Regards,
Gary Boyles
-----Original Message-----
From: Sarah Romeis [mailto:sromeis AT us.ibm DOT com]
Sent: Wednesday, January 10, 2001 2:37 PM
To: IBM NetView Discussion
Subject: RE: [NV-L] netmon question
How do you increase the number of ping threads with Netview?
Sarah Romeis
IBM Global Services 1630 Long Pond Rd Rochester, NY 14626
Internet: sromeis AT us.ibm DOT com
Lotus Notes: IBMUSM10(SROMEIS)
Voice: (716) 723-4354 Fax:(716) 723-4299
"Boyles, Gary P" <gary.p.boyles AT intel DOT com>@tkg.com on 01/10/2001 04:31:27
PM
Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>
Sent by: owner-nv-l AT tkg DOT com
To: "'IBM NetView Discussion'" <nv-l AT tkg DOT com>
cc:
Subject: RE: [NV-L] netmon question
Have you tried increasing the number of ping-threads?
Gary Boyles, Intel
-----Original Message-----
From: Stephen Elliott [mailto:selliott AT epicrealm DOT com]
Sent: Wednesday, January 10, 2001 1:19 PM
To: 'nv-l AT tkg DOT com'
Subject: [NV-L] netmon question
Hello, everyone,
Here's the teaser question of the week: Has anyone tried to, or know of
someone who has tried to, modify netmon to use fping vs. ping? I'm dealing
with consistent netmon backlogs since the v6.0.1 upgrade (it used to stay
current. We have a PMR open on this issue.) and we can't reduce the status
interval. We're looking at several options (one being a local Linux poller
at each data center, etc.) to get around it but was just wondering if this
had been tried.
Regards,
Steve Elliott
Sr. Network Mgmt. Engineer
epicRealm, Inc.
214-570-4560
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
|
