This could be because of the level of your Netview. There are some new
interface types (like 112) that are not supported until 5.1.2.  Are you
able to
discover other devices of this type?

Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit


Thomas Seidel <seidelt AT dbf.ddb DOT de>@tkg.com on 07/24/2000 11:43:19 AM

Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>

Sent by:  owner-nv-l AT tkg DOT com


To:   "nv-l AT tkg DOT com" <nv-l AT tkg DOT com>
cc:
Subject:  [NV-L] NV cannot discover a replaced router



I just replaced an IBM router with a CISCO 7120 without changing their IP
addresses, then I deleted the IBM router object from the IP map and all
submaps. Now it seems that NV cannot discover the new router. I verified
that the SNMP settings and access lists on the CISCO are right. On the NV
box running snmpget with the CISCO works fine. Any hints?

NetView V4R1
AIX 4.1
CISCO 7120 IOS 12.0

Thanks
-- Thomas

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l