This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
I checked the netmask of the loopback interface, it was indeed set to
255.255.255.252. I asked the network guys why and the answer was that in
earlier times you were not allowed (unable) to set a mask of
255.255.255.255. So the "loopback-netmask"-design of our network is
255.255.255.252 due to historical reasons.
Anyway we reconfigured the Cisco 1600 to 255.255.255.255, did a demand poll
and also a new discovery but received the same results as I posted before.
I will call support today but I'm still interested if there is anybody out
there with NetView 6.0 discovering loopback interfaces.
With kind regards / mit freundlichen Gruessen
Andreas Kuffer (System Manager UNIX and Enterprise Management)
-----Original Message-----
From: lclark AT us.ibm DOT com [mailto:lclark AT us.ibm DOT com]
Sent: Donnerstag, Juli 06, 2000 16:30
To: IBM NetView Discussion
Subject: Re: [NV-L] What happened to netmon Flag?
The -L flag was dropped in V6 (made a no-op) because it was no longer
needed. This is because, according to the internal update I attended,
32-bit masks are now fully supported; 32-bit masks are generally used for
software loopback interfaces. The connection is not exactly clear to me,
but I have seen loopbacks discovered successfully in V6, whether the
loopback was the address specified in the seedfile or not. So by my
voodoo-problem-determination methodology, I would suggest checking
the mask on the loopback that is missing. If it is not 255.255.255.255,
make
it so. If it is already so, look for some other, more mundane discovery
problem, or call Support with a trace of the discovery handy.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
Kuffer Andreas <Andreas.Kuffer AT kuoni DOT ch>@tkg.com on 07/06/2000 04:59:40
AM
Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>
Sent by: owner-nv-l AT tkg DOT com
To: "'IBM NetView Discussion'" <nv-l AT tkg DOT com>
cc:
Subject: [NV-L] What happened to netmon Flag?
AIX 4.3.2, NV 5.1.2 and NV 6.0
in version 6.0 of netview it seems that one flag of netmon (-L, discover
loopback interfaces with other address than 127.0.0.0) was withdrawn.
I have a Cisco 1600 with loopback interface 10.10.224.85 and three other
interfaces
Demand poll with NV 5.1.2 (netmon runs with -L):
Interface 10.10.232.86 (currently up) responded to ping
Interface 10.10.21.1 (currently up) responded to ping
Interface 10.10.224.85 (currently up) responded to ping
Interface 10.10.240.86 (down since 07/03/00) ping timed out
Demand poll with NV 6.0 shows:
Interface 10.10.232.86 (currently up) responded to ping
Interface 10.10.21.1 (currently up) responded to ping
Interface 10.10.240.86 (down since 07/03/00) ping timed out
So it looks like netmon V6.0 doesn't discover the loopback interface I'd
like to see. Does that work as designed? Did I miss anything? Can I use an
undocumented "-L feature"?
Any help is very welcome...Andreas
With kind regards / mit freundlichen Gruessen
Andreas Kuffer (System Manager UNIX and Enterprise Management)
Kuoni Travel Ltd.
Dep. TOU
Neue Hard 7
CH-8010 Zuerich
Switzerland
Telefon : + 41 1 277 52 41
Fax : + 41 1 272 52 55
<<< the smile that you send out returns to you >>>
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
I checked the netmask of the loopback interface, it was indeed set to 255.255.255.252. I asked the network guys why and the answer was that in earlier times you were not allowed (unable) to set a mask of 255.255.255.255. So the "loopback-netmask"-design of our network is 255.255.255.252 due to historical reasons.
Anyway we reconfigured the Cisco 1600 to 255.255.255.255, did a demand poll and also a new discovery but received the same results as I posted before.
I will call support today but I'm still interested if there is anybody out there with NetView 6.0 discovering loopback interfaces.
With kind regards / mit freundlichen Gruessen
Andreas Kuffer (System Manager UNIX and Enterprise Management)
-----Original Message-----
From: lclark AT us.ibm DOT com [mailto:lclark AT us.ibm DOT com]
Sent: Donnerstag, Juli 06, 2000 16:30
To: IBM NetView Discussion
Subject: Re: [NV-L] What happened to netmon Flag?
The -L flag was dropped in V6 (made a no-op) because it was no longer
needed. This is because, according to the internal update I attended,
32-bit masks are now fully supported; 32-bit masks are generally used for
software loopback interfaces. The connection is not exactly clear to me,
but I have seen loopbacks discovered successfully in V6, whether the
loopback was the address specified in the seedfile or not. So by my
voodoo-problem-determination methodology, I would suggest checking
the mask on the loopback that is missing. If it is not 255.255.255.255,
make
it so. If it is already so, look for some other, more mundane discovery
problem, or call Support with a trace of the discovery handy.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
Kuffer Andreas <Andreas.Kuffer AT kuoni DOT ch>@tkg.com on 07/06/2000 04:59:40 AM
Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>
Sent by: owner-nv-l AT tkg DOT com
To: "'IBM NetView Discussion'" <nv-l AT tkg DOT com>
cc:
Subject: [NV-L] What happened to netmon Flag?
AIX 4.3.2, NV 5.1.2 and NV 6.0
in version 6.0 of netview it seems that one flag of netmon (-L, discover
loopback interfaces with other address than 127.0.0.0) was withdrawn.
I have a Cisco 1600 with loopback interface 10.10.224.85 and three other
interfaces
Demand poll with NV 5.1.2 (netmon runs with -L):
Interface 10.10.232.86 (currently up) responded to ping
Interface 10.10.21.1 (currently up) responded to ping
Interface 10.10.224.85 (currently up) responded to ping
Interface 10.10.240.86 (down since 07/03/00) ping timed out
Demand poll with NV 6.0 shows:
Interface 10.10.232.86 (currently up) responded to ping
Interface 10.10.21.1 (currently up) responded to ping
Interface 10.10.240.86 (down since 07/03/00) ping timed out
So it looks like netmon V6.0 doesn't discover the loopback interface I'd
like to see. Does that work as designed? Did I miss anything? Can I use an
undocumented "-L feature"?
Any help is very welcome...Andreas
With kind regards / mit freundlichen Gruessen
Andreas Kuffer (System Manager UNIX and Enterprise Management)
Kuoni Travel Ltd.
Dep. TOU
Neue Hard 7
CH-8010 Zuerich
Switzerland
Telefon : + 41 1 277 52 41
Fax : + 41 1 272 52 55
<<< the smile that you send out returns to you >>>
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|