nv-l

Re: Re-installing the TMR (while netview exists already)

2000-06-22 11:15:46
Subject: Re: Re-installing the TMR (while netview exists already)
From: "Dean Grant" <dgrant AT aholdusa DOT com>
To: nv-l AT lists.tivoli DOT com
Date: Thu, 22 Jun 2000 11:15:46 -0400
Did the IP address change at all? This error happens often when the address
changes or the host name changes. Make sure host name resolution is set
properly. Try running "oserv -k $DBDIR -n by_name" and see if that helps once
name resolution is set. The information on this sort of problem can be found in
the Tivoli Framework Planning and Installation Guide, Chapter 13.

Dean Grant
Ahold Information Services





Clarence Hart <rti1clh AT ismd.ups DOT com> on 06/21/2000 06:00:38 PM

Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>

To:   nv-l AT tkg DOT com
cc:    (bcc: Dean Grant/AIS/US/Ahold)
Subject:  Re: [NV-L] Re-installing the TMR (while netview exists already)



I think I may need to do this because when I run the tivoli command
I get the following message:

 # tivoli
destination dispatcher unavailable

The netview stuff still runs and I can start and stop it just fine but I
cant get to the GUI screens that allow you to install Netview Client or
see Policy Regions and more...

So , I think I have to do a migration  install.


Clarence



> X-Lotus-FromDomain: AHOLD
> From: "Dean Grant" <dgrant AT aholdusa DOT com>
> To: IBM NetView Discussion <nv-l AT tkg DOT com>
> Date: Wed, 21 Jun 2000 14:27:25 -0400
> Subject: Re: [NV-L] Re-installing the TMR (while netview exists already)
> Mime-Version: 1.0
> Content-Disposition: inline
> X-Sorted: Bulk
>
>
>
> Are you sure you need to do this? My system is a managed node like yours. All
I
> do is login to my server as root and launch the desktop from there. Have you
> tried this, or have the Tivoli team locked this down?
>
> All you need to do to try it i,s from a root command prompt, export the
display,
> type ". /etc/Tivoli/setup_env.sh" to setup the environment, then type "tivoli"
> at the command prompt.
>
> HTH
>
> Dean Grant
> Ahold Information Services
>
>
>
>
>
> Clarence Hart <rti1clh AT ismd.ups DOT com> on 06/21/2000 11:36:16 AM
>
> Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>
>
> To:   nv-l AT tkg DOT com
> cc:    (bcc: Dean Grant/AIS/US/Ahold)
> Subject:  [NV-L] Re-installing the TMR (while netview exists already)
>
>
>
>
> Q-
>
>      I had the tivoli TMR and framework install on an Ultra-10 with  netview
>       installed also. The TMR was removed/disabled and converted to a managed
>       node of another TMR at a remote site.  Well since this broke some of
>       the functionality of the netview stuff (because, I lost admin rights to
> the TMR) I now have to put the TMR & framework stuff back.
>       1) Will I be able to install the framework and make my server
>          a TMR again without uninstalling the netview software?
>
>       2) Do you recommend just dumping the entire /usr/OV from
>          tape and  letting the discover daemon play catch-up?
>
>
> Basically I dont want to uninstall netview since I have everything working.
>
>
> CH
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
>
>
>
>
>
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l

_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l