Re: Réf. : Remote Router Deleted

2000-06-09 11:48:22
Subject: Re: Réf. : Remote Router Deleted
From: "Ken Karasek" <KGKARASE AT hewitt DOT com>
To: nv-l AT lists.tivoli DOT com
Date: Fri, 9 Jun 2000 10:48:22 -0500
Leslie, would it be better to put the one interface in the seed file with the
assigned DNS name or the IP address of the assigned DNS name?  What would be the
result of either instance. I currently put the IP address in the seed file in
the event that there is a problem with resolution. The primary and secondary DNS
servers run outside of the NetView system.

From: lclark AT us.ibm DOT com on 06/07/2000 10:06 PM

Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>

To:   NV-L AT tkg DOT com
Subject:  Réf. : [NV-L] Remote Router Deleted

Alexis, it is ok to have different names on each interface. But you must
put only ONE of them in the seedfile for each node, as Paul said. Pick the
loopbacks, if they have them. Now take netmon down, delete all of those
things from the map, and anything related to them. Close the map. Do an
ovtopofix -a. And restart netmon, and the map. At this point you will be
it right. If you still have a problem, then something unusual is going on.
But as it
stands, you  can expect wierd things if a device appears more than once
in the seedfile.


Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking

---------------------- Forwarded by Leslie Clark/Southfield/IBM on
06/07/2000 11:01 PM ---------------------------

alexis.henry AT bnpparibas DOT [email protected] on 06/07/2000 03:00:08 AM

Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>

Sent by:  owner-nv-l AT tkg DOT com

To:   nv-l AT tkg DOT com

Subject:  Réf. : [NV-L] Remote Router Deleted

I put 6 interfaces for each router in my seed file, because each resoves
with a
different name in the DNS.
I have neither way nor authority to change this features.
Then i tried to add this interfaces in my /etc/hosts in order to have only
name for each router.

Some routers are now discovered but others are not. What is really strange
that netview discovered 4 routers (say router1, router2, ..., router4) wich
all connected to a router named sysa, but does not appear in any submap (i
only one map).
I tried to demand poll on router1 to router4 but i can't discover sysa.

If i use ovobjprint i have:

 ovobjprint -s sysa
                OBJECTID                SELECTION NAME


        FIELD ID        FIELD NAME                      FIELD VALUE
        10              Selection Name                  "sysa"
        11              IP Hostname                     "sysa"
        133             XXMAP Protocol List             "IP"
        560             IP Name                         "sysa"

Any help would be grateful.
Thank you.

Alexis Henry
Banque Nationale de Paris.

Paul.tasillo AT tivoli DOT com on 06/06/2000 19:15:59

Veuillez répondre à nv-l AT tkg DOT com

Pour :    nv-l AT tkg DOT com
cc :   (ccc : Alexis Henry/DOSI/BNP)
Objet :   [NV-L] Remote Router Deleted


L integrite de ce message n'etant pas assuree sur Internet, les societes du
groupe BNP Paribas ne peuvent etre tenues responsables de son contenu.
Si vous n'etes pas destinataire de ce message, merci de le detruire et
d'avertir l'expediteur.


The integrity of this message cannot be guaranteed on the Internet,
companies of the BNP Paribas group can not therefore be considered
responsible for the contents.
If you are not the intended recipient of this message, then please delete
it and notify the sender.

Did you happen to seed all the interfaces for our core router in the netmon
seed file? You should seed only one interface per router (one that resolves
in the DNS perferably).

Paul Tasillo
NetView Development
Tivoli Systems, Inc.

NV-L List information and Archives: http://www.tkg.com/nv-l

NV-L List information and Archives: http://www.tkg.com/nv-l

<Prev in Thread] Current Thread [Next in Thread>