nv-l

Reg Ciscoworks

2000-05-03 09:41:50
Subject: Reg Ciscoworks
From: lclark AT us.ibm DOT com
To: nv-l AT lists.tivoli DOT com
Date: Wed, 3 May 2000 09:41:50 -0400
Here's a short document on Cisco's new integration model
for their new web-based product line.
(See attached file: cwnms_tb.htm)
It explains that the integration hook is now the responsibility
of the NMS vendor, with verification by Cisco. So all NMS
platforms and versions can be supported on day 1, in theory.

Here's the website where you go to find out about the integrations
that are supported now:

http://www.cisco.com/kobayashi/library/netmanage/cview/

It says 'Coming soon' for Netview V6 on AIX, NT, Solaris,
and available now for Netview B5.1 on AIX.





Cordially,

Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
(248) 552-4968 Voicemail, Fax, Pager


---------------------- Forwarded by Leslie Clark/Southfield/IBM on
05/03/2000 09:35 AM ---------------------------

"M Robert Prakash" <robertprakash AT chennai.tcs.co DOT in>@tkg.com on 
05/02/2000
11:45:36 PM

Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>

Sent by:  owner-nv-l AT tkg DOT com


To:   Discussion of IBM NetView and POLYCENTER Manager on NetView
      <NV-L AT UCSBVM.ucsb DOT edu>
cc:
Subject:  [NV-L] Reg Ciscoworks





Hi Jane

Does Ciscoworks integrate with Netview for NT??

Thanks and Regards

Robert






Jane Curry <jane.curry AT SKILLS-1ST.CO DOT UK> on 02/22/2000 03:51:15 PM

Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView
      <NV-L AT UCSBVM.ucsb DOT edu>

To:   NV-L AT UCSBVM.ucsb DOT edu
cc:    (bcc: M Robert Prakash/Hardware/TCSCHENNAI)

Subject:  Re: Reg Ciscoworks




CiscoWorks can either be an add-on to NetView (or other NMS) or it can
stand
alone.  CiscoWorks 2000 seems to be a brand name that covers a number of
products.  There is CiscoWorks Routed WAN Management Solution which gives
Resource Manager Essentials (RME) which is Cisco Inventory, Change
Management,
Software Distribution and Syslog error management. CiscoView gives
graphical
views of Cisco kit with the ability to do some customisation. There is also
an
ACL manager, Internetwork Performance Monitor and Traffic Director
software.

There is a CiscoWorks 2000 Campus bundle which I think is just about to
release
a
new packaging including RME and CiscoView, as above, but also adding on
User
Registration and CWSI which provides ATM and VLAN tools.

The 3rd CW2000 packaging is Service Level Management which again gives RME
and
CiscoView plus a Service Level Manager application

I have the new CW2000 Routed WAN Management Solution integrated with
NetView
5.1.2.  I have NetView on AIX4.3.3 and CW on Solaris 2.7.  I have
integration in
that I used NetView to do all discovery and then imported NetView's
database
selectively into RME.  I also have the Integration Utility code so that I
get
new
Cisco icons on my NetView topo map and a new top-level menu in NetView that
starts off CiscoView.

Regards, Jane
--
Tivoli Certified Enterprise Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2000 Jane Curry <jane.curry AT skills-1st.co DOT uk>.  All rights
reserved.






_________________________________________________________________________

NV-L List information (unsubscribing, policies, posting, digest version,
searchable archives): http://www.tkg.com/nv-l

cc/cisco/mkt/enm/cw2000
hometocprevnextpdfsearchhelp

Table of Contents

Technology Brief

Integrating CiscoWorks2000 with NMS Platforms

Technology Brief

Integrating CiscoWorks2000 with NMS Platforms

As users of CiscoWorks2000 link together a variety of Cisco, third-party, and internally developed network management applications into a management intranet, one of the most commonly asked questions is, "does CiscoWorks2000 integrate with my network management system (NMS) platform?" To help users build their management intranets with their NMS platforms, Cisco is working closely with the leading companies in this market, including BullSoft, Computer Associates, Fujitsu, Hewlett-Packard, and Tivoli to provide our customers with:

  • New Web-based integration of CiscoWorks2000 solutions and NMSs

  • Greater flexibility in the physical location of CiscoWorks2000 and NMSs

  • Greater flexibility in operating system deployment

  • Quicker time to market for CiscoWorks2000/NMS support

New Web-Based Integration Method

With the release of the CiscoWorks2000 Routed WAN Management Solution and LAN Management Solution, Cisco has developed the CiscoWorks2000 integration utility. When installed on a NMS and coupled with a specific CiscoWorks2000 integration adapter developed by the NMS vendor, the integration utility enables the following integration services:

  • Launch of CiscoView 5 from the NMS maps or menus

  • Launch of the device center of Resource Manager Essentials 3.x from the NMS maps or menus

  • MIB registration with NMS platform1

  • Cisco-provided icons display on NMS maps1

  • Incremental new Cisco device support via Cisco Connection Online (CCO)

  • Incremental new Cisco management application integration via CCO

  • Integration of CiscoWorks2000 applications and NMSs residing on different servers and even different operating systems

  • Dynamic updates to integration information in the NMS

  • Dynamic upgrades to new versions of the NMS without reinstalling or waiting for a new release of CiscoWorks2000 software

  • Flexibility in customizing the management intranet environment using completely Web-based tools from Cisco

  • Frequent NMS support updates downloaded from CCO Software Center

As shown in Figure 1, the CiscoWorks2000 integration utility is responsible for obtaining the necessary information about Cisco MIBs, Cisco icons, and Cisco application registration (such as CiscoView) and providing this information to the NMS.


Figure 1: New Cisco Device Integration


When new Cisco devices are released, the information needed by the NMS and CiscoView to manage these devices, including the MIBs, icons, and CiscoView updates, is posted on CCO and made available to the NMS through the CiscoWorks2000 integration utility. Once this information is downloaded to the integration utility, it is the function of the CiscoWorks2000 integration adapter, developed by the NMS vendor, to process this information and properly bind this new Cisco device and CiscoWorks2000 application data with the NMS.

This integration method will also be used to bind new CiscoWorks2000 applications with the NMS when they become available, such as the applications in the upcoming CiscoWorks2000 Service Management Solution.

Greater Flexibility Via Web-Based Integration

Historically, if users wanted to integrate an application like CiscoView with a NMS, both applications had to reside on the same machine, with the same operating system version. Because one of the main functions of a NMS is the integration of multiple applications to manage a network, it was not uncommon for three to five different applications from different vendors to all be installed on the same machine.

This caused problems, however, when one of the vendors released an upgrade requiring a new operating system version or other changes in system requirements. Users were often forced to either keep their existing set of applications, depriving themselves of new functionality, or install the new application on a different machine without the NMS integration, forcing the common "swivel-chair" approach to network management.

The new Web-based version of CiscoView combined with the CiscoWorks2000 integration utility eliminates this dilemma. The CiscoWorks2000 integration utility is designed to be installed directly on the NMS. During the installation process, the user is asked to select the appropriate CiscoWorks2000 integration adapter for their NMS, along with where CiscoView and the other CiscoWorks2000 applications are to be installed on their network. Now that CiscoView is Web-based, it and the other Web-based components of CiscoWorks2000 no longer must physically reside on the same machine as the NMS. The user can input the name of the CiscoWorks2000 server and the integration utility, working in conjunction with the CiscoWorks2000 integration adapter, properly binds the two applications together.

Instead of launching a "local" application installed on the same machine when the CiscoView application is selected from the NMS map, the NMS launches a browser window pointed directly at the CiscoWorks2000 server, wherever it is installed on the network. No matter where CiscoWorks2000 is installed (either on the same machine or different machines) the integration remains the same.


Figure 2: Flexible Deployment of NMS Integrated Systems


In this scenario, a NMS with the CiscoWorks2000 integration utility and adapter installed and running on HP-UX, IBM AIX, Microsoft Windows NT, or Sun Solaris can be integrated with CiscoWorks2000 on any combination of its supported operating systems.

In addition, the Web-based services of CiscoWorks2000 enable different parts of an IT organization to easily access the same CiscoWorks2000 applications. Previously, if different parts of an organization wanted access to an application like CiscoView, they were forced to maintain two separate installations of the Cisco software.

Quicker Time to Market---"Day One" Integration

This new CiscoWorks2000/NMS integration model fundamentally changes the engineering, testing, and release of NMS integration, resulting in quicker time to market for NMS support.

Previously, for a NMS to be supported by Cisco, all of the integration software development and testing necessary to deliver NMS support was the sole responsibility of Cisco. This integration software was built directly into the CiscoView application. If a new version or new operating system of a NMS was coming to market, a final version of the NMS had to be made available to Cisco at the same time a new version of CiscoView was being engineered. Since the engineering cycles of CiscoView and the range of NMSs on the market were rarely on the same time schedule, more often than not CiscoView either did not have support for a new NMS, or support for it lagged by a few months. CiscoView was always engineered for incremental Cisco device support, but it was not designed for NMS changes.

In the new model, Cisco is responsible for engineering the necessary software for obtaining new Cisco device and management application information, and providing it to the appropriate NMS integration adapter. It is the responsibility of the NMS vendor to make the necessary changes to their integration adapter if and when they have new features, functions, version changes, and so on that would impact the proper integration of CiscoWorks2000 and their NMS.

When a NMS vendor makes changes to their adapter, the adapter is run through a independent certification system at KeyLabs, Inc., verifying its integration with CiscoWorks2000. Once certified, the adapter is made available to all CiscoWorks2000 customers via CCO, and can be immediately installed with the CiscoWorks2000 integration utility installed on the NMS. As Cisco releases new versions of CiscoWorks2000, the current set of "certified" NMS adapters will be bundled with CiscoWorks2000 to ease the installation step for users.

In this new model, where the NMS vendor is responsible for the necessary changes to their adapter and the delivery of this adapter is not tied directly to the release or any engineering of a Cisco product, the integration of CiscoWorks2000 and NMSs becomes market-driven. It is now possible for Cisco management products and NMS products to be engineered on separate schedules, but have integration available the first day either of the products is released, creating "day one" integration.


1Use of these CiscoWorks2000/NMS integration services is at the discretion of the NMS vendors.

hometocprevnextpdfsearchhelp

Posted: Thu Apr 6 16:48:00 PDT 2000
Copyright 1989 - 2000©Cisco Systems Inc.

<Prev in Thread] Current Thread [Next in Thread>