Event/Ruleset Question

2000-03-29 05:04:20
Subject: Event/Ruleset Question
From: "Julio Leal" <jjllmm AT hotmail DOT com>
To: nv-l AT lists.tivoli DOT com
Date: Wed, 29 Mar 2000 10:04:20 CEST
I think you won't be able to collect any SNMP data based on IP Status = 
What Linda means in this context by "critical" is "important" routers.

Julio Leal

From: owner-nv-l AT tkg DOT com
Date: 28/03/2000 12:58:22
Subject: Re: [NV-L] Event/Ruleset Question

The first thing to note here is that you are not going to alter what netmon
does.  His polling intervals should remain whatever they have been.  
altering your SNMP Configuration is not what is meant here. And it would be 
bad idea to attempt that .  Besides, netmon polling will take no notice of 
and memory utilization in those devices.

Rather, I think that what you are being asked to do is to collect your own 
via SNMP  and take action on it.    So you are going to create a collection
based on isRouter and IP Status = Critical and then you are going to use 
collection in snmpCollect.    I cannot tell you what MIB values you will 
have to
use to obtain values for things like CPU and memory in the router.  You will
have to determine that for yourself unless some other user responds with a
suggestion.  I would use the mib browser against one of those routers and 
wht kind of data it will respond with.   In any case, once you have 
collecting on these MIB values, you can set a threshold and have it notify 
with an event when that threshold is exceeded.  That event can then be used 
drive a pop-up window or whatever alert mechanism you need.   That's where 
ruleset or automatic action in trapd comes in -- at the very end.

James Shanks
Tivoli (NetView for UNIX and NT) L3 Support

"Ferreira, Linda" <FerreiraL AT nabisco DOT com> on 03/28/2000 12:43:44 PM

Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>

cc:    (bcc: James Shanks/Tivoli Systems)
Subject:  [NV-L] Event/Ruleset Question

Hi Everyone,
I have been asked to poll critical routers (I have a collection) at
different intervals for different criteria.
Example:  Poll critical routers every 2hrs. and alert if memory is less than
         Poll critical routers every 30 minutes and alert if CPU
utilization goes highter than 65%

Can anyone tell me what's the best way to do this?  Filter/ Ruleset or
other?  If I have the same collection, but I want to poll at different time
intervals, where do I set that up?  Right now they are being polled every 5
minutes.  Do I need to add this collection to the SNMP configuration, and if
I do, can I add it twice?  One time for 2 hr. polling and the other for
1/2hr polling.  Any assistance would be greatly appreciated.

Linda Ferreira
Network Management Center
ferreiral AT nabisco DOT com


NV-L List information (unsubscribing, policies, posting, digest version,
searchable archives): http://www.tkg.com/nv-l


NV-L List information (unsubscribing, policies, posting, digest version,
searchable archives): http://www.tkg.com/nv-l

Get Your Private, Free Email at http://www.hotmail.com

<Prev in Thread] Current Thread [Next in Thread>