Still another possibility is that the ip address of this box was previously
used and Netview discovered it some times ago. Now the ip address is bound to
another object, even if it's no longer defined there, and Netview won't add an
ip interface for the new box. In this case you have an object without ip
address, so Netview decides, and thats logical, that the box can't do ip.
There is a little problem with Netview and deleting ip addresses which are no
longer defined on a box. So check your trapd.log for duplicate address traps or
try to locate the address in the GUI. If it appears on another box you either
have a problem with duplicate addresses ot it was not deleted in NV when it was
deleted on that box. Delete th interface icon manually and then try to add the
new box again.
Michael Seibold
>>> lclark AT us.ibm DOT com 22.03.2000 02.55 Uhr >>>
The blue box probably has no interface card underneath it. I would
look through the object database for something with the IP address
of that interface card. And take a look at the APM topologies for
left-over bits of that node.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
================================================================
They were set that way by netmon, who, for some reason, is not able to
communicate with that box. What you have is a discovery problem and the
way to
solve that is to try to figure out why netmon cannot do his job. Modifying
the
object properties won't help because config polls will still fail in the
future.
I would start by doing an snmpwalk of that box and seeing what you get
back.
James Shanks
Tivoli (NetView for UNIX and NT) L3 Support
"Steve Stamper" <sstamper AT foremost DOT com> on 03/21/2000 12:21:04 PM
Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>
To: "IBM NetView Discussion" <nv-l AT tkg DOT com>
cc: (bcc: James Shanks/Tivoli Systems)
Subject: [NV-L] Modifying an objects Capabilities
I have 2 Compaq servers installed and configured identical. First shows up
as as up/normal (green) and the second shows up unknown (blue). I have
deleted the second object (stopped netmon, deleted the second from maps,
ovtopofix -a, and restared netmon) and it 're-discoveres' it again as
unknown. After a little deeper investigation, I found that the second has
the "isPC" and "isIP" Capabilities in the Object Description set to false.
I'm not sure what set them but how can I change these?
Thanks all for your help!
Steve Stamper
Grand Rapids, MI
_________________________________________________________________________
NV-L List information (unsubscribing, policies, posting, digest version,
searchable archives): http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information (unsubscribing, policies, posting, digest version,
searchable archives): http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information (unsubscribing, policies, posting, digest version,
searchable archives): http://www.tkg.com/nv-l
|
