Linda,

Hi There!

I saw your note on the NetView forum, and thought I'd say hello.  How are things
going for you?  Jennifer Nelson and I are working together again at a customer
site.  Say hello to Brad!

Take Care!

Rick Reed


Linda Parry <lparry AT METLIFE DOT COM> on 02/23/2000 03:45:03 PM

Please respond to Discussion of IBM NetView and POLYCENTER Manager on NetView
      <NV-L AT UCSBVM.UCSB DOT EDU>

To:   NV-L AT UCSBVM.UCSB DOT EDU
cc:    (bcc: Rick Reed/Tivoli Systems)
Subject:  snmpwalk versus mib browser




I loaded a cisco mib file for the local director product.  I am able to query
this mib from the mib browser via the snmpv1/snmpv2 pull down.  I cannot walk
this device with snmpwalk "ipaddress".  I get "End of MIB".  I can however, pull
the same local director info from the device using snmpwalk and the local
director MIB OID number   ie snmpwalk "ipaddress" .1.3.6.1.4.1.9.9.99

I thought the snmpwalk command would use the mibs I loaded to allow me to query
the device from the command line without entering specific MIBs.
I believe the MIB I loaded is V2, could this be my problem?  If so, how can I
query this device from the command line.