nv-l

Re: NetView Help doesn't start.

2000-01-12 09:38:57
Subject: Re: NetView Help doesn't start.
From: "Demets.Steven" <Demets.Steven AT ARMY.MIL DOT BE>
To: nv-l AT lists.tivoli DOT com
Date: Wed, 12 Jan 2000 15:38:57 +0100
                Found the problem.  The libraries for the dynatext browser
and the binaries for the books weren't installed due to a the lack of room
in the Tivoli FS.  Made the FS bigger and reinstalled both the browser and
the books.
                Works fine now, thanks to all...

                Steven Demets
                1Sgt
                CVILM
                Dept Explo
                Sec WAN
                Tf Bemiltel: 9-2320-6099
                Tf Belgacom: +32 2 2556099
                Fax Bemiltel 9-2400-3777
                Fax Belgacom: +32 2 7013777
                email prive: Steven.Demets AT village.uunet DOT be
<mailto:Steven.Demets AT village.uunet DOT be>
                email werk: Demets.Steven AT army.mil DOT be
<mailto:Demets.Steven AT army.mil DOT be>


                -----Original Message-----
                From:   James Shanks [mailto:James_Shanks AT TIVOLI DOT COM]
                Sent:   woensdag 12 januari 2000 15:37
                To:     NV-L AT UCSBVM.ucsb DOT edu
                Subject:        Re: NetView Help doesn't start.

                But the migration to 5.1 would require a re-install of the
books.  They are not
                migrated.  Did you do that?
                And 5.1.1 has no code which impacts the books.   They aren't
changed between
                major releases.

                On AIX  the default binary directory  is
/usr/Tivoli/bin/aix4-r1/bin.  Yours
                could be different, depending on the options you used at
install time (echo
                $BINDIR will show you what it is if you have sourced the
Tivoli environment).
                But wherever your Tivoli binray directory is, you should
find dtext and dtextdde
                there.
                Do you have them?

                And libdtlsit.a is in /usr/Tivoli/lib/aix4-r1 by default (or
in $LIBDIR).  Is
                that there?

                If so, then you probably need to source the Tivoli
environment before you start
                the GUI  :
                     .  /etc/Tivoli/setup_env.sh

                Did you do that?

                If they aren't there,  then you need to re-install the books

                James Shanks
                Tivoli (NetView for UNIX) L3 Support



                "Demets.Steven" <Demets.Steven AT ARMY.MIL DOT BE> on 01/12/2000
09:08:06 AM

                Please respond to Discussion of IBM NetView and POLYCENTER
Manager on NetView
                      <NV-L AT UCSBVM.UCSB DOT EDU>

                To:   NV-L AT UCSBVM.UCSB DOT EDU
                cc:    (bcc: James Shanks/Tivoli Systems)
                Subject:  Re: NetView Help doesn't start.




                                Yes, I did, and everything worked fine until
I upgraded my
                Netview 5.0 to 5.1 and then to 5.1.1


                                Steven Demets
                                1Sgt
                                CVILM
                                Dept Explo
                                Sec WAN
                                Tf Bemiltel: 9-2320-6099
                                Tf Belgacom: +32 2 2556099
                                Fax Bemiltel 9-2400-3777
                                Fax Belgacom: +32 2 7013777
                                email prive: Steven.Demets AT village.uunet DOT 
be
                <mailto:Steven.Demets AT village.uunet DOT be>
                                email werk: Demets.Steven AT army.mil DOT be
                <mailto:Demets.Steven AT army.mil DOT be>


                                -----Original Message-----
                                From:   Boyce, Robert L
[mailto:robert.l.boyce AT LMCO DOT COM]
                                Sent:   woensdag 12 januari 2000 15:09
                                To:     NV-L AT UCSBVM.ucsb DOT edu
                                Subject:        Re: NetView Help doesn't
start.

                                Did you source the tivoli environment?

                                -----Original Message-----
                                From: Leslie Clark
[mailto:lclark AT US.IBM DOT COM]
                                Sent: Wednesday, January 12, 2000 9:01 AM
                                To: NV-L AT UCSBVM.UCSB DOT EDU
                                Subject: Re: Netview Help doesn't start.


                                Did you install the Dynatext Browser and the
books
                components from the
                                installation media? The online help comes
with the books -
                all or nothing.

                                Cordially,

                                Leslie A. Clark
                                IBM Global Services - Systems Mgmt &
Networking
                                Detroit


                                ---------------------- Forwarded by Leslie
                Clark/Southfield/IBM on
                                01/12/2000 08:59 AM
---------------------------

                                "Demets.Steven"
<Demets.Steven AT ARMY.MIL DOT BE>@UCSBVM.UCSB.EDU>
                on 01/12/2000
                                08:38:52 AM

                                Please respond to Discussion of IBM NetView
and POLYCENTER
                Manager on
                                      NetView <NV-L AT UCSBVM.UCSB DOT EDU>

                                Sent by:  Discussion of IBM NetView and
POLYCENTER Manager
                on NetView
                                      <NV-L AT UCSBVM.UCSB DOT EDU>


                                To:   NV-L AT UCSBVM.UCSB DOT EDU
                                cc:
                                Subject:  Netview Help doesn't start.



                                                Hi everyone,

                                                I've got a problem with my
NV5.1.1 on an AIX
                4.2.3 for a
                                while now.  I can't start the help.  When I
look in the
                nv6000.log it tels
                                me the following :

                                                Could not load program
dtextdde
                                                Could not load library
libdtlsit.a
                                                Error was: No such file or
directory

                                                What is libdtlsit.a, where
should it be, how
                can I get it
                                there ?
                                                Any comments deeply
appreciated.

                                                Steven.

                                                Steven Demets
                                                1Sgt
                                                CVILM
                                                Dept Explo
                                                Sec WAN
                                                Tf Bemiltel: 9-2320-6099
                                                Tf Belgacom: +32 2 2556099
                                                Fax Bemiltel 9-2400-3777
                                                Fax Belgacom: +32 2 7013777
                                                email prive:
Steven.Demets AT village.uunet DOT be
                                <mailto:Steven.Demets AT village.uunet DOT be>
                                                email werk:
Demets.Steven AT army.mil DOT be

<mailto:CVILM-EXPLO-COM-WAN-TECH3 AT army.mil DOT be>


<Prev in Thread] Current Thread [Next in Thread>