No Subject

1999-12-15 12:51:08
Subject: No Subject
From: Niko Kaniadakis <niko_kaniadakis AT IT.IBM DOT COM>
To: nv-l AT lists.tivoli DOT com
Date: Wed, 15 Dec 1999 18:51:08 +0100

My customer have a lot of branches with the following configuration:
In each branch there  are two routers,  the Router 2 has two interface:
ethernet and isdn. In the POP there is a router who   receive the isdn calls
from a lot of branch routers but supports (at the same time) up to 30 isdn
The network is managing by NetView AIX 5.1.1. Router 2 has the isdn interface
unmanaged and managed just the ethernet interface. Router 2 (according to its
configuration) when receive a pachet in the ethernet interface route this
through the isdn interface .  NetView ping for status information the ethenet
interface of  Router 2  in the branches (there are more  than 30) but   the
Router 3 cannot manage all these isdn calls so the Router 2 appears in the
NetView submap  in critical status BUT if you ping  it after a while the NetView
will report the status correctly.
I am wondering if can "customize" the netmon ping (maintain the ping interval)
in such way that won't ping  "at the same  time" all the ethernet interface of
all Router 2.
Any idea or hint ?.
Thanks a lot.
Nikos Kaniadakis

(Embedded image moved to file: pic05684.pcx)

Attachment: pic05684.pcx
Description: Binary data

<Prev in Thread] Current Thread [Next in Thread>