Thanks - I tried the unmanaged but it did not help.
FYI - Here's the UP and DOWN traps I'm having:

=UP=
Trap #3, specific: 0, args (4):
 [1] mgmt.mib-2.interfaces.ifTable.ifEntry.ifIndex.14 (Integer): 14
 [2] mgmt.mib-2.interfaces.ifTable.ifEntry.ifDescr.14 (OctetString):
Serial3/7
 [3] mgmt.mib-2.interfaces.ifTable.ifEntry.ifType.14 (Integer): 22
 [4] local.linterfaces.lifTable.lifEntry.locIfReason.14 (OctetString):
Keepalive OK
 Cisco 7200  [1] mgmt.mib-2.interfaces.ifTable.ifEntry.ifIndex.14 (Integer):
14
 [2] mgmt.mib-2.interfaces.ifTable.ifEntry.ifDescr.14 (OctetString):
Serial3/7
 [3] mgmt.mib-2.interfaces.ifTable.ifEntry.ifType.14 (Integer): 22
 [4] local.linterfaces.lifTable.lifEntry.locIfReason.14 (OctetString):
Keepalive OK
 Cisco7200



=DOWN=
Trap #2, specific: 0, args (4):
 [1] mgmt.mib-2.interfaces.ifTable.ifEntry.ifIndex.14 (Integer): 14
 [2] mgmt.mib-2.interfaces.ifTable.ifEntry.ifDescr.14 (OctetString):
Serial3/7
 [3] mgmt.mib-2.interfaces.ifTable.ifEntry.ifType.14 (Integer): 22
 [4] local.linterfaces.lifTable.lifEntry.locIfReason.14 (OctetString):
Keepalive failed
 Cisco7200  [1] mgmt.mib-2.interfaces.ifTable.ifEntry.ifIndex.14 (Integer):
14
 [2] mgmt.mib-2.interfaces.ifTable.ifEntry.ifDescr.14 (OctetString):
Serial3/7
 [3] mgmt.mib-2.interfaces.ifTable.ifEntry.ifType.14 (Integer): 22
 [4] local.linterfaces.lifTable.lifEntry.locIfReason.14 (OctetString):
Keepalive failed
 Cisco7200





> -----Original Message-----
> From: James Shanks [mailto:James_Shanks AT TIVOLI DOT COM]
> Sent: Monday, October 18, 1999 8:36 AM
> To: NV-L AT UCSBVM.ucsb DOT edu
> Subject: Re: Cisco Router Serial Link Trap
>
>
> I am sorry but I didn't see that the subject of your message
> said "Cisco Router
> serial Link trap".  I presume the only way to stop this is to
> re-configure your
> router, but I don't have a clue how to do it.
>
> James Shanks
> Tivoli (NetView for UNIX) L3 Support
>
>
>
> James Shanks <James_Shanks AT TIVOLI DOT COM> on 10/18/99 09:27:41 AM
>
> Please respond to Discussion of IBM NetView and POLYCENTER
> Manager on NetView
>       <NV-L AT UCSBVM.UCSB DOT EDU>
>
> To:   NV-L AT UCSBVM.UCSB DOT EDU
> cc:    (bcc: James Shanks/Tivoli Systems)
> Subject:  Re: Cisco Router Serial Link Trap
>
>
>
>
> Have you tried unmanaging the interface from the GUI?
>
> James Shanks
> Tivoli (NetView for UNIX) L3 Support
>
>
>
> "Chance, Larry" <lchance AT SFBCIC DOT COM> on 10/18/99 09:01:09 AM
>
> Please respond to Discussion of IBM NetView and POLYCENTER
> Manager on NetView
>       <NV-L AT UCSBVM.UCSB DOT EDU>
>
> To:   NV-L AT UCSBVM.UCSB DOT EDU
> cc:    (bcc: James Shanks/Tivoli Systems)
> Subject:  Cisco Router Serial Link Trap
>
>
>
>
> NetView for NT
>
> I have a serial link that's going up and down 3 times a minute.
> This will go on until the T1 vendor gets their act together and
> can make the link stay up.
>
> But in the meantime, Does anyone know how I can single out
> this interface to stop sending traps?
>
> tia
>