nv-l

Re: Duplicate Address trap

1999-10-12 11:44:57
Subject: Re: Duplicate Address trap
From: "Waddle, Duane" <DWaddle AT COMDATA DOT COM>
To: nv-l AT lists.tivoli DOT com
Date: Tue, 12 Oct 1999 10:44:57 -0500
We accomplished something similar via the use of a ruleset.  We set up a
collection that contained the dupe-IP devices that we DIDN'T care about.
(On my net, we have many different customers that we NAT onto our net, so
some addresses appear MANY times over)  When that particular event occurred
from one of the devices in the collection, block the event.  Seems to work
OK.

--D


> -----Original Message-----
> From: Brad Martin [SMTP:bmartin AT METLIFE DOT COM]
> Sent: Monday, October 11, 1999 10:45 AM
> To:   NV-L AT UCSBVM.UCSB DOT EDU
> Subject:      Re: Duplicate Address trap
>
> We've encountered the same problem with slip addresses. The way we
> addressed the
> issue was to change the trap to "LOG ONLY". At the end of each day, we
> have a
> script that reads the trapd.log for the duplicate IP messages, filters the
> one
> that contain valid IP addresses, and then emails the report to specific
> engineers. If you familiar with Korn Shell, the script looks something
> like
> this.....
>
> #
> # Extracts duplicate addess messages & creates a tempfile
> grep "Duplicate Address" trapd.log  > tempfile.rpt
> #
> # Filters messages that have 127.0.0.1 from the tempfile
> grep -v "127.0.0.1" tempfile.rpt > dupip.rpt
> #
> #Sends the report to usr@abc..
> mail -s"Duplicate Address" "usr@abc" < dupip.rpt
>
>
> Brad Martin
> Metlife
>
>
>
>
>
>
> "BAUDOUX BERNARD" <bernard.baudoux AT FORTISBANK DOT COM> on 10/11/99 
> 02:47:08 AM
>
> Please respond to "Discussion of IBM NetView and POLYCENTER Manager on
> NetView"
>       <NV-L AT UCSBVM.ucsb DOT edu>
>
> To:   NV-L AT UCSBVM.ucsb DOT edu
> cc:    (bcc: Brad Martin/Bsg/MetLife/US)
> Subject:  Re: Duplicate Address trap
>
>
>
> Hi,
>
> if you use the same IP address for some interfaces, then I guess this
> particular address is not of much mean for you.
> Have you tried to 'unmanage' the interfaces associated to this address ?
>
> Regards,
> Bernard Baudoux
> IS/DIS/Telecom/ LAN & Routers Architectures
> * : +32 (0)2/56.524.68
> * : 66/U
> e-mail : bernard.baudoux AT fortisbank DOT com
>
>
> > -----Original Message-----
> > From: Sin Wai Yee, Maggie [SMTP:mwysin AT KCRC DOT COM]
> > Sent: Monday, 11 October, 1999 03:32
> > To:   NV-L AT UCSBVM.UCSB DOT EDU
> > Subject:      Duplicate Address trap
> >
> > I have received many duplicate address trap. The reason is that we are
> > using
> > same SLIP address for some switches and same Loopback address for some
> > routers. For our existing setting, how should we handle this case ?
> >
> > Please comment ?


<Prev in Thread] Current Thread [Next in Thread>