Re: Software working with Netview 5.1.1

1999-08-30 08:57:30
Subject: Re: Software working with Netview 5.1.1
From: Gord Michaels <gord_michaels AT HOTMAIL DOT COM>
To: nv-l AT lists.tivoli DOT com
Date: Mon, 30 Aug 1999 05:57:30 PDT
I know that CiscoWorks 4.0 works with Netview 5.1 but is NOT officially
supported on Netview 5.1 by Cisco. I have used them together before and all
seemed fine.


>From: Leslie Clark <lclark AT US.IBM DOT COM>
>Reply-To: Discussion of IBM NetView and POLYCENTER Manager on NetView
>        <NV-L AT UCSBVM.ucsb DOT edu>
>To: NV-L AT UCSBVM.ucsb DOT edu
>Subject: Re: Software working with Netview 5.1.1
>Date: Sun, 29 Aug 1999 21:21:19 -0400
>Well, it appears that nobody wants to say. Usually we are worrying whether
>the latest versions will work. I will say that the Nways bit is so far out
>that it is anybody's guess. But if the 8230 PSM is all you want, it might
>a try, if you have media. The mgtapptran is the part to worry about.
>was delivered as a PTF to Netview. I THINK in Nways V3 it was delivered
>with Nways, in which case it might still work. It was replaced again in
>Manager for AIX V1, and is now gone altogether in V2.   I would worry about
>it on AIX 4.3, and worry less on AIX 4.2.  You might have to try it. I also
>comment on whether it is y2k-compliant.
>Another idea: get current software? Nways V2 is now priced by node, so
>upgrade for customers with only a few IBM devices are very attractively
>priced. Check it out at http://www.ibm.networking.com.
>I cannot even speculate on the Cisco. You should check with them, I think.
>Leslie A. Clark
>IBM Global Services - Systems Mgmt & Networking
>I4m planning the Migration from today`s NetView for AIX 4.1 to NetView
>for AIX 5.1.1 .
>I want know if the following Software will work correctly with
>NetView for AIX Version 5.1.1:
>- CISCO View Version 4.1.1
>- NWAYS Campus Manager LAN Version 3.1 from 1997, here I need only the
>IBM8230 Manager with corresponding PSM`s.
>Thank you

Get Your Private, Free Email at http://www.hotmail.com

<Prev in Thread] Current Thread [Next in Thread>