Try the event command -- just
event -h gord1
and see if you get a dunny Node Up event.
Do you have any other applications running on this box, like the Optivity Fault
Tivoli (NetView for UNIX) L3 Support
Gord Michaels <gord_michaels AT HOTMAIL DOT COM> on 08/10/99 03:21:12 PM
Please respond to Discussion of IBM NetView and POLYCENTER Manager on NetView
<NV-L AT UCSBVM.UCSB DOT EDU>
To: NV-L AT UCSBVM.UCSB DOT EDU
cc: (bcc: James Shanks/Tivoli Systems)
Subject: Re: snmptrap script...
Hmmmm... thanks for the response.
This is weird. The wraps only appear in this email, everything is OK in the
actual script. I tried using the actual hostname... no luck. I run the
script, it executes for a second, and then gives me my prompt back. Seems
OK, but nothing shows up in trapd.log, but it worked fine for you...
Well, anyone else with any ideas??
>From: James Shanks <James_Shanks AT TIVOLI DOT COM>
>Reply-To: Discussion of IBM NetView and POLYCENTER Manager on NetView
> <NV-L AT UCSBVM.ucsb DOT edu>
>To: NV-L AT UCSBVM.ucsb DOT edu
>Subject: Re: snmptrap script...
>Date: Tue, 10 Aug 1999 14:37:31 -0400
>Well, assuming that where it appears to wrap (at the comment line in line 3
>at the .220.127.116.11.18.104.22.168.22.214.171.124.0 OctetString line) it really does wrap
>that the real one has these commands all on one line), I don't see anything
>wrong. And in fact, I copied it to my box and tried it. Worked fine using
>NetView address instead of yours, after I fixed the wrap.
>Are you sure you have the correct address? If you are on the NetView
>and sending to the NetView server, you could use `hostname` (those are
>back-ticks not single quotes) or the actual hostname spelled out rather
>Tivoli (NetView for UNIX) L3 Support
>Gord Michaels <gord_michaels AT HOTMAIL DOT COM> on 08/10/99 01:51:51 PM
>Please respond to Discussion of IBM NetView and POLYCENTER Manager on
> <NV-L AT UCSBVM.UCSB DOT EDU>
>To: NV-L AT UCSBVM.UCSB DOT EDU
>cc: (bcc: James Shanks/Tivoli Systems)
>Subject: snmptrap script...
>I have wriiten a snmptrap test script as shown below. But it simply will
>work and I get no errors back, the script seems to run fine. There is no
>entry in the trapd.log file and of course no event in the Events Display
>window. I am executing the script from the Netview Server itself, i.e.
>126.96.36.199. Anyone see what my problem is here??
>#Uses the Interface Down as a test event - 58916867 (netview6000 enterprise
>NVHOST=188.8.131.52 # the netview host
>ABOUTHOST=184.108.40.206 # the node the trap is about or from
>MYTRAPID=58916867 # Specific trap id (interface down)
>ENTERPRISE='.220.127.116.11.18.104.22.168.3' # Netview enterprise
>/usr/OV/bin/snmptrap $NVHOST $ENTERPRISE $ABOUTHOST 6 $MYTRAPID 1 \
> .22.214.171.124.126.96.36.199.188.8.131.52.0 Integer 14 \
> .184.108.40.206.220.127.116.11.18.104.22.168.0 OctetString $ABOUTHOST \
> .22.214.171.124.126.96.36.199.188.8.131.52.0 OctetString "This is a snmptrap test
> .184.108.40.206.220.127.116.11.18.104.22.168.0 OctetString "nill"
>Any info appreciated.
>Get Your Private, Free Email at http://www.hotmail.com
Get Your Private, Free Email at http://www.hotmail.com