Hi All,
sorry, I haven't read through the history of this,
but have you ver tried
ovw -webconfig
Hopefully this will solve your problem.
Best regards
Matthias Widmann
HVILLEGA wrote:
> Hi Karin: Thanks for your answer. I did the procedure that you told me, but I
> can´t see the Cisco symbols in the web interface yet. The X interface is
> showing the symbols correctly.
> When I ran the "ovw -config", there weren´t errors.
> Does anybody know what else can I do ?
>
> Best Regards,
> Hernan D. Villegas.
>
> Karin Binder <karin.binder AT NWA DOT COM> con fecha 22/06/99 15:27:42
>
> Por favor, responda a karin.binder AT nwa DOT com
>
> Destinatarios: NV-L AT UCSBVM.ucsb DOT edu
> CC: (cci: HVILLEGA/BIC)
> Asunto: Fw: Problems with the Cisco symbols
>
> Hernan,
>
> I'm also running AIX 4.3.2, NV5.1.1, CW2000 Essentials and Campus. I had
> problems opening NetView after applying the CW2000 maintenance upgrade
> (ver 2.1/2.3). It seems some of the device packages were incomplete, and
> the missing bitmaps caused problems with the NetView GUI (i.e pop-ups
> galore "error during reading background files" and NO symbols on the map).
> I'm not sure if it impacted the web access as I was preoccupied with
> getting main NetView GUI functioning again. I'm not sure if you're running
> into a similar scenario. If it is, the following may help.
>
> Identify the failing packages by running 'ovw -config' and grep the output
> for "Failed".
> You can compare these results to the files in the bitmaps/C directory. I
> found the base file missing for the 1400 and 8540-csm (zero length files in
> this directory can also cause problems). The uninstallpkg utility failed
> since the major part of the package was missing. Remove entries for the
> failing packages in /usr/OV/symbols/C/CVTYPE and
> /usr/OV/conf/C/oid_to_sym. Rerun ovw -config (and -fields and -verify for
> good measure) - the compilation errors should be resolved.
>
> After doing the above, our map once again opens and with the appropriate
> Cisco symbols. Likewise with the map from the web browser.
>
> Good Luck!
>
> ----------
> > From: Booker Rosemary <rbooker AT WOOLWORTHS.COM DOT AU>
> > To: NV-L AT UCSBVM.UCSB DOT EDU
> > Subject: Re: Problems with the Cisco symbols
> > Date: Monday, June 21, 1999 4:22 PM
> >
> > Hernan
> >
> > I came across a similar problem a while ago. I think you are missing a
> font
> > set on your machine. You will need to load this from your AIX
> installation
> > CD. Unfortunately I can't remember which font set it belonged to. Check
> that
> > you have loaded all the required font sets that are listed in the Release
> > Notes. Anyway I just loaded all the fonts I could find and things seemed
> to
> > work fine after that.
> >
> > The problem you are having is releated to X-Windows, indirectly caused by
> > NetView.
> >
> > Regards,
> > Rosemary
> >
> > > -----Original Message-----
> > > From: HVILLEGA [SMTP:hvillega AT BANCOLOMBIA.COM DOT CO]
> > > Sent: Tuesday, 22 June 1999 7:01
> > > To: NV-L AT UCSBVM.ucsb DOT edu
> > > Subject: Problems with the Cisco symbols
> > >
> > > Hi all, I have Netview 5.1.1 , AIX 4.3.2, Cisco Works 2000
> Essentials
> > > V
> > > 2.1 and Campus V 2.3. Since I installed Cisco works , the Web
> interface
> > > hasn´t
> > > shown the Cisco Symbols. It only appears the IP address.
> > > I have done the next things:
> > >
> > > I deleted the /usr/OV/web/httpd/htdocs/TME10/NetView/images/symbols
> except
> > > the
> > > colIcon.*.gif files. After this, I rebuilt the symbols via
> > > /usr/OV/web/httpd/cgi-bin/install. It din´t work.
> > >
> > > I ran the Administer -> Netview Web Interface -> Rebuild GIF Files,
> via
> > > the
> > > Netview interface. It didn´t work.
> > >
> > > I ran the ovw -webconfig command , and it showed :
> > > Warning: Cannot convert string "Rom10" to type FontStruct
> > > X Error of failed request: BadMatch (invalid parameter attributes)
> > > Major opcode of failed request: 73 (X_GetImage)
> > > Serial number of failed request: 9431
> > > Current serial number in output stream: 9431
> > >
> > >
> > > Does anybody know what else can I do ?
> > >
> > > Thanks,
> > >
> > > Hernan D. Villegas
> > **********************************************************************
> > CAUTION: This Message may contain confidential information intended
> > only for the use of the addressee named above. If you are not the
> > intended recipient of this message you are hereby notified that any
> > use, dissemination, distribution or reproduction of this message is
> > prohibited. If you received this message in error please notify
> > Mail Administrators immediately. Any views expressed in this
> > message are those of the individual sender and may not necessarily
> > reflect the views of Woolworths Ltd.
> > **********************************************************************
|
