Scott,

Environment:
TMR A includes TEC Server and TEC Consoles
TMR B includes Netview Server

Given the fact that TEC Console requires TEC Server to be installed in the
same TMR (not interconnected TMRs) if I go ahead and install the TEC Server
in the TMR where NetView is running can I install a TEC Console that points
to a TEC Server in another interconnected TMR.  If this is true then is
there any needed role of the TEC Server that was installed in the NetView
TMR or is just an unnecessary prerequisite?

Regards,

Tom Giovannini
Enterprise Management Engineering - South
Address:
        5400 Legacy Drive
        M/S:  A4-1C-38
        Plano, TX   75024
Phone:  (972) 604-4105 (8-834) Fax:  -4776
Internet:  tom.giovannini AT eds DOT com


                -----Original Message-----
                From:   Scott Donohoo [mailto:scott.donohoo AT TIVOLI DOT COM]
                Sent:   Wednesday, June 23, 1999 11:33 AM
                Subject:        Re: NetView/TEC Integration

                Hello Tom,

                You will have to install a TEC server in the NetView TMR
even if that is
                not the TEC server you are using with the NetView/TEC
Integration.
                Otherwise, you will not be able to install a TEC Console on
the NetView
                server as required. You did not specify the error you are
getting when
                trying to install the Integration Adapter but it does prereq
check for the
                console. If you are not able to install the TEC Console on
the NetView
                server, you will not be able to install the TEC/NetView
Integration Adapter.

                Scott

                At 09:16 AM 6/23/99 -0500, you wrote:
                >I have just recently joined the NetView Forum.  I have a
little problem with
                >the NetView and Tivoli Integration.
                >
                >My environment is:
                >*       TMR which includes TEC, DM, INV, SD,RC
                >*       A separate TMR running NetView only
                >*       The TMRs have a two way interconnnection
                >*       NetView version is 5.1.1
                >*       Framework version is 3.6
                >
                >Has anyone been able to get the full integration (as
documented in the TIPN
                >User's Guide) running in a similar environment?
                >
                >Problems encountered:
                >*       Cannot install TEC Console in the TMR running
NetView since this TMR
                >does not have TEC Server installed.
                >*       Having error installing the NetView/TEC Integration
Adapter.
                >
                >Thanks in advance.
                >Regards,
                >
                >Tom Giovannini
                >Enterprise Management Engineering - South
                >Address:
                >        5400 Legacy Drive
                >        M/S:  A4-1C-38
                >        Plano, TX   75024
                >Phone:  (972) 604-4105 (8-834) Fax:  -4776
                >Internet:  tom.giovannini AT eds DOT com
                >