nv-l

Re: Creating collection for Cisco Switches...

1999-06-16 14:14:14
Subject: Re: Creating collection for Cisco Switches...
From: "Clifford L. Crane" <Cliff_Crane AT CARGILL DOT COM>
To: nv-l AT lists.tivoli DOT com
Date: Wed, 16 Jun 1999 13:14:14 -0500
I just did this under 5.1 for NT using isVendor=Cisco and isSwitch=True
both found under Edit---->Find in the Simple Properties tab under Other
Properties select Type then select Switch from the scroll down list,
then click Add To Advanced, then click Add Condition then select Vendor
and select Cisco from the scroll down list and click Add To Advanced
then click Create Smartset.  Type a name for the smartset in the dialog
box and it works.

cc

-----Original Message-----
From: Joe.Prokott AT WESTGROUP DOT COM [mailto:Joe.Prokott AT WESTGROUP DOT COM]
Sent: Wednesday, June 16, 1999 12:45 PM
To: NV-L AT UCSBVM.UCSB DOT EDU
Cc: Joe.Prokott AT WESTGROUP DOT COM
Subject: Re: Creating collection for Cisco Switches...


How about isCisco=TRUE, isRouter=FALSE, isBridge=TRUE  ???

Joe

-----Original Message-----
From: Gord Michaels [mailto:gord_michaels AT HOTMAIL DOT COM]
Sent: Wednesday, June 16, 1999 12:34 PM
To: NV-L AT UCSBVM.UCSB DOT EDU
Subject: Re: Creating collection for Cisco Switches...


Nope... don't have it. Just double checked. I looked in the Collection
Editor under "Modify" and under "Edit --> Modify/Describe --> Object -->
Capabilites" Nothing there for "isSwitch"

Gord.


>From: Steve Pirollo <spirollo AT SUNGARD DOT COM>
>Reply-To: Discussion of IBM NetView and POLYCENTER Manager on NetView
>        <NV-L AT UCSBVM.ucsb DOT edu>
>To: NV-L AT UCSBVM.ucsb DOT edu
>Subject: Re: Creating collection for Cisco Switches...
>Date: Wed, 16 Jun 1999 13:11:56 -0400
>
>I justed doubled checked.  I am also running 5.1.1.
>
>Under Edit -> Object -> Capabilities ->, near the end of the list  I
have a
>field  "isSwitch" .
>
>
>
>
>
>Gord Michaels <gord_michaels AT HOTMAIL DOT COM> on 06/16/99 12:56:03 PM
>
>Please respond to Discussion of IBM NetView and POLYCENTER Manager on
>NetView
>       <NV-L AT UCSBVM.UCSB DOT EDU>
>
>To:   NV-L AT UCSBVM.UCSB DOT EDU
>cc:    (bcc: Steve Pirollo/SCS/SunGard)
>Subject:  Re: Creating collection for Cisco Switches...
>
>
>
>
>Thanks Steve but originally I looked for a "isSwitch" but could not
find
>one, I still cannot.  I am running Netview 5.1.1. Are you sure you are
>using
>"isSwitch"
>
>Gord.
>
>
> >From: Steve Pirollo <spirollo AT SUNGARD DOT COM>
> >Reply-To: Discussion of IBM NetView and POLYCENTER Manager on NetView
> >        <NV-L AT UCSBVM.ucsb DOT edu>
> >To: NV-L AT UCSBVM.ucsb DOT edu
> >Subject: Re: Creating collection for Cisco Switches...
> >Date: Wed, 16 Jun 1999 12:08:54 -0400
> >
> >Gord,
> >
> >  I have just completed this myself  -  isCisco = True and isSwitch =
>True
> >
> >
> >
> >
> >
> >Gord Michaels <gord_michaels AT HOTMAIL DOT COM> on 06/16/99 11:23:53 AM
> >
> >Please respond to Discussion of IBM NetView and POLYCENTER Manager on
> >NetView
> >       <NV-L AT UCSBVM.UCSB DOT EDU>
> >
> >To:   NV-L AT UCSBVM.UCSB DOT EDU
> >cc:    (bcc: Steve Pirollo/SCS/SunGard)
> >Subject:  Creating collection for Cisco Switches...
> >
> >
> >
> >
> >Hello All.
> >
> >I have created a Collection for all my Cisco routers. But, what
logic do
>I
> >use to create a Collection for all my Cisco switches ??
> >
> >isCisco=TRUE and ?????
> >
> >Any info appreciated.
> >
> >Gord.
> >
> >
> >______________________________________________________
> >Get Your Private, Free Email at http://www.hotmail.com
>
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

<<attachment: WINMAIL.DAT>>