Re: snmpwalk on NT (was: priorities)
Oh yes, I would certainly like to hear some other ideas because I need
to prove to someone why one Netview can do it and the other can't.
Also the difference b/w the two netviews related to these NT boxes is
that the one which can snmpwalk both interface is in a remote network
while the Netview Server that is having problems is in the same subnet
(probably the same LAN switch) as these NT boxes.
--- James Shanks <James_Shanks AT TIVOLI DOT COM> wrote:
> If the box doesn't respond on that interface, it is
> not NetView's problem
> but one with the box itself and the vendor supplying
> the operating system
> code or snmp agent. It should respond on both and
> you should contact
> Microsoft about it unless someone else has an idea.
> James Shanks
> Tivoli (NetView for UNIX) L3 Support
> Kashif Karim <kashif_karim AT YAHOO DOT COM> on 06/11/99
> 11:51:22 AM
> Please respond to Discussion of IBM NetView and
> POLYCENTER Manager on
> NetView <NV-L AT UCSBVM.UCSB DOT EDU>
> To: NV-L AT UCSBVM.UCSB DOT EDU
> cc: (bcc: James Shanks/Tivoli Systems)
> Subject: Re: priorities (was nothing)
> I don't exactly know either what Theo meant, but
> probably its similar
> to my question here.
> All our midrange boxes have two interfaces. One is
> called the A
> interface and the other M interface. (this is just a
> naming convention
> only). I have two Netview servers in different TMRs.
> On one of these
> servers I am able to snmpwalk the NT midranges
> giving host name of
> either of these interfaces, but on the other,
> snmpwalk on the M
> interface of NTs timesout. On both the servers, I am
> able to snmpwalk
> the HP and Sun boxes through both interfaces.
> What could possibly be the problem.
> Is there a way to set priority on one network
> interface as perhaps Theo
> asked for.
> --- James Shanks <James_Shanks AT TIVOLI DOT COM> wrote:
> > Theo -
> > What do you mean bt "priorities"? That is not a
> > NetView term for whatever
> > you are trying to do.
> > Do you mean setting the polling times? That can
> > done using SNMP
> > Configuration from the Options pull-down of the
> > or by typing in
> > xnmsnmpconf on the command line.
> > James Shanks
> > Tivoli (NetView for UNIX) L3 Support
> > Theo Odendaal <theoo AT IMPOTEK.CO DOT ZA> on 06/11/99
> > 02:57:07 AM
> > Please respond to Discussion of IBM NetView and
> > POLYCENTER Manager on
> > NetView <NV-L AT UCSBVM.UCSB DOT EDU>
> > To: NV-L AT UCSBVM.UCSB DOT EDU
> > cc: (bcc: James Shanks/Tivoli Systems)
> > Subject:
> > Hallo all
> > Can somebody please be so kind to help me with the
> > following problem
> > AiX version 18.104.22.168.
> > Netview version 5.1
> > Question.
> > How can I set priorities on a single interface in
> > Netview.
> > Many thanks
> > Theo Odendaal
> Do You Yahoo!?
> Get your free @yahoo.com address at
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com