nv-l

Re: bypass subnets to manage another subnet

1999-06-07 10:40:40
Subject: Re: bypass subnets to manage another subnet
From: Rob Rinear <robr AT DIRIGO DOT COM>
To: nv-l AT lists.tivoli DOT com
Date: Mon, 7 Jun 1999 10:40:40 -0400
You'll want to enter the ip address of a router on the 10.1.5 network
individually on a line, too.  The notation below will "allow" Netview to
discover that range, but will not tell it to proactively discover devices on
it.  By specifying a specific router (with snmp community in place), Netview
will discover that device and subsequently the networks and devices
attached.

-----Original Message-----
From: Discussion of IBM NetView and POLYCENTER Manager on NetView
[mailto:NV-L AT UCSBVM.UCSB DOT EDU]On Behalf Of Geoffrey Cheng
Sent: Sunday, June 06, 1999 2:33 PM
To: NV-L AT UCSBVM.UCSB DOT EDU
Subject: Re: bypass subnets to manage another subnet


Brian,

     make your seed file look like:

     ...
     !10.1.1.0-254
     10.1.5.0-254
     ...

     and restart your map regeneration, with "new node discovery" switched
on.
     Then on your default submap, you will have at least two separated
network
     icons,10.1.1 and 10.1.5. In 10.1.1, the only discovered node will be
your
     NetView workstation, while in 10.1.5, resides the nodes you want to
discover.

Best Regards

Geoffrey Cheng
Sr. Network Management Specialist
SNMS/IBM Canada Ltd.
Tel: 905-316-5820 (IBM Office)
Tel: 416-304-4272 (CIBC-Intria)
e-mail: gcheng AT ca.ibm DOT com



Brian Hwang <bhwang AT TW.IBM DOT COM> on 06/05/99 12:29:45 PM

Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView
      <NV-L AT UCSBVM.UCSB DOT EDU>

To:   NV-L AT UCSBVM.UCSB DOT EDU
cc:    (bcc: Geoffrey Cheng/Markham/IBM)
Subject:  bypass subnets to manage another subnet





If netview's IP address is 10.1.1.1/255.255.255.0 , default gateway is
10.1.1.254.
Can I directly force netview to discover the subnet 10.1.5.0 with no
10.1.1.254 community?
the routing path are 10.1.1.1->10.1.1.254->10.1.2.254->10.1.5.254.
How to do it ?


Any help would be appreciated.
Thanks!

 Brian Hwang,
 IBM,Taiwan
 TEL:886-7-213-5523
 FAX:886-7-216-5488
 E-Mail: bhwang AT tw.ibm DOT com

<Prev in Thread] Current Thread [Next in Thread>