nv-l

Re: XX XX

1999-05-05 17:21:38
Subject: Re: XX XX
From: Nicaud Phil <pnicaud AT WOOLWORTHS.COM DOT AU>
To: nv-l AT lists.tivoli DOT com
Date: Thu, 6 May 1999 07:21:38 +1000
HI Dimitri

I think you'll find that, unless you have an IP address on that port,
Netview will not be able to poll it. When you run a demand poll, you will
see the port listed but not managed. I have this very same problem with some
X.25 ports on a router.

I understand that you can write some code using the Netview open topology
tools but I have started on that yet. Anybody else out there ?

Phil

> -----Original Message-----
> From: Dimitri Setti [SMTP:Dimitri.Setti AT FCCRT DOT IT]
> Sent: Thursday, 6 May 1999 1:39
> To:   NV-L AT UCSBVM.ucsb DOT edu
> Subject:      XX XX
>
> From: Dimitri Setti@ITFCCRT0 on 05/05/99 16.38
>
>
> To:   Discussion of IBM NetView and POLYCENTER Manager on NetView et alia
>       <NV-L AT UCSBVM.UCSB DOT EDU>
> cc:
> Subject:  XX XX
>
>
> Hi at all.....
> I use Netview 5.0 on Aix 4.2.1.
>
> my question is about sdlc devices........I have some stations linked by
> serial
> line at cisco router,
> and these stations use sdlc card.
> If I want to show on my map these stations, how may I do?
> Have I  to configure netview6000 with some particular parameter, or some
> particular file?
>
> ciao & thanks
>
>
> dimitri
>
>
>
> ***********************************************************************
> Dimitri Setti
>    Fondo Comune Casse Rurali Trentine
>    via Segantini n.18
>    38100  TRENTO
>    ITALY
>
>    Tel:               +39   461   874.111 centralino
>                       +39   461   874.266 diretto
>    Fax:               +39   461   874.123
>
>    e-mail:   Dimitri.Setti AT fccrt DOT it
> ***********************************************************************
**********************************************************************
CAUTION: This Message may contain confidential information intended
only for the use of the addressee named above. If you are not the
intended recipient of this message you are hereby notified that any
use, dissemination, distribution or reproduction of this message is
prohibited. If you received this message in error please notify
Mail Administrators immediately. Any views expressed in this
message are those of the individual sender and may not necessarily
reflect the views of Woolworths Ltd.
**********************************************************************

<Prev in Thread] Current Thread [Next in Thread>
  • XX XX, Dimitri Setti
    • Re: XX XX, Nicaud Phil <=