Hi there,
You also need to install the X11 file sets..... You go into SMIT and
Install From latest available, and then look for the X11 filesets that you
are missing. YOu can pull forth the search fuction with a " / " if u r in a
gui smit OR the function key that is designated for the search function if
in a smitty................
Have a good and painless install.....
Ziyad Choudhury
B 010 / 2D-03
522 South Rd.
Poughkeepsie, NY 12601
IBM Global Services
Certified Netware Engineer
E-Mail:: ZIYAD AT US.IBM DOT COM
Phone: ( 914) -433-1124
Pager: 1-800-759-8352 Pin 1772452
http://www.Skytel.com/Paging/pageme.cgi?pin=1772452,2
---------------------- Forwarded by Ziyad A Choudhury/Southbury/IBM on
03/09/99 03:59 PM ---------------------------
"Brook, Bryan S" <bryan.s.brook AT LMCO DOT COM> on 03/09/99 03:41:53 PM
Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView <NV-L AT UCSBVM.UCSB DOT EDU>
To: NV-L AT UCSBVM.UCSB DOT EDU
cc: (bcc: Ziyad A Choudhury/Southbury/IBM)
Subject: Re: NetView 5.1 Install Failure on aix4-r1
Im going to take a wild guess that the prereqs that are listed with an *
weren't installed. Follow the Release Notes and install the prereqs.
> ----------
> From: Weiya Cai[SMTP:weiya_cai AT compuware DOT com]
> Reply To: Weiya Cai
> Sent: Tuesday, March 09, 1999 3:04 PM
> To: NV-L AT UCSBVM.UCSB DOT EDU
> Subject: NetView 5.1 Install Failure on aix4-r1
>
> Hi, all,
>
> I am trying to install NV 5.1 on an aix machine, and I got
> following failures after I installed TME 10 3.6, and applied
> the NV 5.1 patch. Can you provide any hints on attacking these
> failures?
>
>
> Thanks.
>
>
> Weiya
>
>
>
> Error Messages:
>
> ...
> Distributing architecture specific NetView Base Configuration for ws250
>
> Something went wrong:
> Media Packet: "/cdrom/FILE28.PKT"
> ws250:FAILED (fatal error)
>
> Failure: the last few lines of the error log
> (/tmp/NVS_51_CONFBASE_after.error):
> | * X11.compat.fnt.pc v=4, r=1 OR r>1
> | * X11fnt.ibm850.pc.fnt v=1, r=2 OR r>2
> At least 1 of the following:
> | * bos.loc.pc_compat.En_US v=4, r=1 OR r>1
> | * bsl.en_US.pc.loc v=3, r=2 OR r>2
> Requisite Failure Key:
> "*" currently not installed on the system.
> + [ = ]
> + rm -r nv6000.base.obj.prereq.out
> + exit 1
> FATAL.
> completed with errors.
>
|
